{"title":"Structures for Metal Roof","description":"\u003ch2\u003eWhat are structures for metal roofs?\u003c\/h2\u003e\n\u003cp\u003eThey are fastening systems designed to install photovoltaic modules on trapezoidal sheets and sandwich panels, safely transferring wind and snow loads to the building’s substructure. They use clamps and self-drilling screws with EPDM gaskets, or specific clamps for standing seam joints, preserving watertightness. This subfamily is part of \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003eStructures for Solar Panels\u003c\/a\u003e and is complemented by \u003ca href=\"\/en\/collections\/accesorios-estructuras\"\u003eAccessories for Structures\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages and limitations\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick installation\u003c\/strong\u003e: direct fastening to sheet crests with drilling templates and lightweight rails.\u003c\/li\u003e\n  \u003cli\u003eGuaranteed watertightness: EPDM washers and specific accessories for sandwich panels.\u003c\/li\u003e\n  \u003cli\u003eStructural lightness: aluminium and stainless steel reduce self-weight and corrosion.\u003c\/li\u003e\n  \u003cli\u003eVersatility: solutions for trapezoidal, corrugated profiles and roofs with standing seam.\u003c\/li\u003e\n  \u003cli\u003eLimitations: requires correct identification of the profile type and sheet thickness to select suitable screws and tightening torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial and logistics buildings with trapezoidal sheet or sandwich panel.\u003c\/li\u003e\n  \u003cli\u003eAgri-food facilities and farms with lightweight metal roofs.\u003c\/li\u003e\n  \u003cli\u003eCar parks and metal canopies with standard profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose the right solution\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType of roof\u003c\/strong\u003e: trapezoidal, sandwich or standing seam. Select a clamp\/support compatible with the profile.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness and material\u003c\/strong\u003e: define the self-drilling screw (tip, thread and length) and whether pre-drilling is required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWind zoning\u003c\/strong\u003e: perimeters and corners require higher anchor densities.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModule geometry\u003c\/strong\u003e: frame height (≈30–40 mm) and support spacing according to manufacturer’s datasheet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad path\u003c\/strong\u003e: always anchor to purlins\/structural bracing; avoid deteriorated sheets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlternatives\u003c\/strong\u003e: if the roof is pitched with tile or slate, consider \u003ca href=\"\/en\/collections\/estructuras-coplanares\"\u003eCoplanar Structures\u003c\/a\u003e; for flat surfaces, \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003eFlat Roof and Ground\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eStructural aluminium profiles; screws and clamps in A2\/A4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSealing\u003c\/td\u003e\n\u003ctd\u003eEPDM washers and base plates shaped to the sheet profile\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eTrapezoidal\/corrugated profiles and sandwich panels of steel or aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule fastening\u003c\/td\u003e\n\u003ctd\u003eEnd and mid clamps, usual frame height 30–40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDesign standards\u003c\/td\u003e\n\u003ctd\u003eEurocodes (wind\/snow) and manufacturer’s guidelines for tightening torques\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003ePeriodic inspection of screws and joints; retightening as per plan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBest practices\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIdentify the sheet profile and measure crest\/valley to choose compatible bases.\u003c\/li\u003e\n  \u003cli\u003eUse self-drilling screws with controlled torque; do not crush the EPDM washer.\u003c\/li\u003e\n  \u003cli\u003eRespect edge setbacks and increase anchors at corners according to wind calculation.\u003c\/li\u003e\n  \u003cli\u003eArrange rails in a direction that minimises stresses and facilitates thermal expansion.\u003c\/li\u003e\n  \u003cli\u003eRoute elevated cabling with UV clips and watertight cable glands when necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eComparisons\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMetal roof\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-coplanares\"\u003e\u003cstrong\u003ecoplanar on tile\u003c\/strong\u003e\u003c\/a\u003e: sheet allows quick drilling and lower self-weight; tile requires hooks and greater attention to waterproofing the structure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMetal roof\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003e\u003cstrong\u003eflat\/ground\u003c\/strong\u003e\u003c\/a\u003e: on metal, lightness and speed are prioritised; on flat\/ground, tilt is optimised and ballast may be required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated accessories\u003c\/h3\u003e\n\u003cp\u003eComplete the installation with \u003ca href=\"\/en\/collections\/accesorios-estructuras\"\u003eclamps, joints, rails, screws and wind stops\u003c\/a\u003e. For an overview by support type, visit the main collection \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003eStructures for Solar Panels\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"estructura-aluminio-coplanar-chapa-1-panel","title":"Coplanar Aluminum Structure Sheet 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet 1 Panel\u003c\/strong\u003e is a flush mounting system for metal roofs (corrugated\/trapezoidal sheet or sandwich panel) that uses angles on the corrugation and a coplanar rail to securely anchor the module. Manufactured from structural aluminum with stainless steel fasteners, it offers quick installation, watertightness via EPDM, and high resistance to wind and snow.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with \u003cstrong\u003eHEX AN16 self-drilling bimetallic screws\u003c\/strong\u003e and EPDM insert.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eMaterials: EN AW-6082 aluminum and A2\/A4 stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the module remains coplanar with the sheet.\u003c\/li\u003e\n  \u003cli\u003eFast and secure installation with reliable sealing at each fixing point.\u003c\/li\u003e\n  \u003cli\u003eHigh rigidity and durability in demanding outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: annual retightening and inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026amp;I buildings with metal roofs where direct, watertight, and long-lasting anchoring is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on metal sheet with angle on corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSheet fixing\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws + EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and mid clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and EPDM tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet 1 Panel\u003c\/strong\u003e is a professional solution that maximizes safety, watertightness, and aesthetics on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758199637,"sku":"ELEKEST001","price":59.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1.png?v=1762625588"},{"product_id":"estructura-aluminio-coplanar-chapa-1-panel-microrail","title":"Coplanar Aluminum Structure Sheet 1 Panel with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminium Structure Sheet 1 Panel with Microrail\u003c\/strong\u003e is a coplanar 'rail-less' system designed to install a photovoltaic module on corrugated metal roofs or sandwich panels quickly, safely, and watertight. By dispensing with the continuous rail, the microrail reduces weight, parts, and assembly time, while maintaining the necessary rigidity thanks to direct fixing on the crest with HEX AN16 self-drilling screws and EPDM washer. It is a professional solution for industrial, agricultural, and commercial buildings that require structural reliability and minimal intrusion into the sheet.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar system with 'rail-less' microrail: lower weight and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eDirect fixing to the crest of the corrugation with HEX AN16 screws + EPDM.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with 30–35 mm module frames using end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminium and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster installation by eliminating the continuous rail and reducing drillings.\u003c\/li\u003e\n  \u003cli\u003eAesthetic integration: the module remains flush with the metal roof.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM washers on each fixing.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: annual retightening and visual inspection of seals.\u003c\/li\u003e\n  \u003cli\u003eLower logistical cost: fewer profiles, fewer cuts, and better use of transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal roofs of industrial, agricultural, and C\u0026I buildings with a slope ≤ 30°. Recommended for projects where installation time and control of roof penetrations are critical, without compromising durability or structural safety.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet\u003c\/td\u003e\n\u003ctd\u003eOn ridge with self-drilling HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape orientation recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per module\u003c\/td\u003e\n\u003ctd\u003e4 (min.): 2 per long edge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel fasteners A2\/A4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTorque values\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind ≤ 150 km\/h; snow ≤ 40 kg\/m² (dimension anchors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, grounding clips per module, cable glands, and UV-resistant ties. Always use EPDM tape\/rings under each fixing to the sheet and verify equipotential continuity of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 1 Panel with Microrail\u003c\/strong\u003e is the ideal option for a clean, watertight, and durable installation, maximizing installation time efficiency and the aesthetics of the metal roof.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758363477,"sku":"ELEKEST033","price":33.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1.png?v=1762625592"},{"product_id":"estructura-aluminio-coplanar-chapa-10-paneles","title":"Coplanar Aluminum Structure Sheet 10 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels\u003c\/strong\u003e is designed for long rows of ten modules on metal roofs. It is fixed on the ridge with HEX AN16 self-drilling screws and EPDM washer, and uses 47×37 mm rails joined with multiple connectors to ensure continuity, expansion control, and cable routing. The result is a robust, watertight installation that is visually integrated, with the modules flush with the sheet metal.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; perimeter reinforcement.\u003c\/li\u003e\n  \u003cli\u003eRails with multiple connectors for long sections.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; load calculation according to site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environmental conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with large sheet metal or sandwich panel surfaces that require structural reliability, watertightness, and quick installation.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 18 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edges\/attic; consider dividing into 5+5 for logistics and load management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels\u003c\/strong\u003e ensures a clean and professional installation, maximizing safety, watertightness, and durability for large-format photovoltaic systems.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758396245,"sku":"ELEKEST010","price":243.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_845e70b1-0911-4a9f-9307-9c31ae53dbda.png?v=1762625598"},{"product_id":"estructura-aluminio-coplanar-chapa-10-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 10 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels with Microrail\u003c\/strong\u003e is designed for long rows of ten modules on metal roofs. The “rail-less” system eliminates the continuous rail and uses microrails fixed directly to the crest of the corrugation with HEX AN16 self-drilling screws and EPDM washer, which drastically reduces the number of components, weight, and installation time. The coplanar mounting improves aesthetic integration and maintains robust and watertight fastening even in demanding environments.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: less logistics, fewer cuts and drillings.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation with discreet coplanar finish.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and easy access for inspection.\u003c\/li\u003e\n  \u003cli\u003eSimple modulation of large roof areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with large sheet metal or sandwich panel surfaces that require high productivity, structural safety, and minimal intrusion on the roof.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eReference supports\u003c\/td\u003e\n\u003ctd\u003e40 microrails (min.); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 18 mid clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Apply EPDM to all fixings and verify equipotential bonding. It is recommended to section into 5+5 to optimize loads, logistics, and maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels with Microrail\u003c\/strong\u003e offers a clean, watertight, and highly reliable assembly for large-format photovoltaic installations on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758494549,"sku":"ELEKEST018","price":104.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_c8dcb817-a989-4258-8ac8-2f3eeb2392b6.png?v=1762625601"},{"product_id":"estructura-aluminio-coplanar-chapa-2-paneles","title":"Coplanar Aluminum Structure Sheet 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 2 Panels\u003c\/strong\u003e allows the installation of a row of two modules flush with the metal roof, securing the angles on the ridge with HEX AN16 self-drilling screws and EPDM washer. The 47×37 mm aluminum rail and universal clamps ensure rigidity, even load distribution, and a clean, durable finish.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with HEX AN16 screws + EPDM.\u003c\/li\u003e\n  \u003cli\u003eRails with connector if the standard section is exceeded for structural continuity.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal roof penetration.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with fewer joints and cable routing through the rail.\u003c\/li\u003e\n  \u003cli\u003eWatertightness ensured at every fixing point.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long outdoor service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for sheet metal roofs in industrial, agricultural, and commercial buildings where a robust, watertight, and quick-to-install system is prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003eUniversal 30\/35 mm (4 end + 2 intermediate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, grounding clips\/kit, cable glands, and EPDM tape for watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 2 Panels\u003c\/strong\u003e offers professional, safe, and durable installation on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758527317,"sku":"ELEKEST002","price":68.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_4121890d-b385-41c3-b627-8aeb5bf21359.png?v=1762625605"},{"product_id":"estructura-aluminio-coplanar-chapa-2-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 2 Panels with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 2 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of two photovoltaic modules on a metal roof with the minimum number of components. The microrail is fixed directly to the crest of the corrugation using HEX AN16 self-drilling screws with EPDM washer, avoiding the use of continuous rails and reducing perforations, weight, and installation time. Universal clamps for 30–35 mm frames ensure fastening and mechanical continuity between modules.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer profiles and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that minimizes the visual impact on the building.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail-based solutions.\u003c\/li\u003e\n  \u003cli\u003eGuaranteed watertightness at every fastening point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and safe installation with standard tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panel roofs where a fast-to-install, watertight, and highly durable system is needed, maintaining site productivity and roof safety.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per module\u003c\/td\u003e\n\u003ctd\u003e4 (min.); indicative total: 8 supports for 2 modules\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 2 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd\/intermediate clamps 30\/35 mm, grounding clips per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and check the equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 2 Panels with Microrail\u003c\/strong\u003e provides speed, safety, and aesthetics on metal roofs, ensuring a professional, watertight, and long-lasting installation.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758592853,"sku":"ELEKEST034","price":40.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_96614367-f1e1-4298-9927-c772895890fd.png?v=1762625609"},{"product_id":"estructura-aluminio-coplanar-chapa-3-paneles","title":"Coplanar Aluminum Structure Sheet 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 3 Panels\u003c\/strong\u003e forms a coplanar row of three modules on a metal roof (corrugated\/trapezoidal sheet or sandwich panel). It is anchored at the crest using HEX AN16 self-drilling screws with EPDM washer and uses a 47×37 mm aluminum rail, achieving a secure, watertight, and visually integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16\u003c\/strong\u003e bimetallic screws and EPDM.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible roof slope: ≤30°; cable routing in the rail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules are flush with the sheet.\u003c\/li\u003e\n  \u003cli\u003eQuick and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and long outdoor service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with metal roofs that require a coplanar, watertight, and highly durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet with crest angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 4 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, clips\/grounding kit, cable glands, and EPDM tape. Maintain expansion joints at connectors and always fix at the crest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 3 Panels\u003c\/strong\u003e offers a clean, secure, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758658389,"sku":"ELEKEST003","price":101.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_fa93084c-35de-4176-949a-778e182d47a9.png?v=1762625614"},{"product_id":"estructura-aluminio-coplanar-chapa-3-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 3 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet, 3 Panels with Microrail\u003c\/strong\u003e arranges a coplanar row of three modules on corrugated metal roofs or sandwich panels. The “rail-less” system replaces the rail with microrails fixed directly on the crest using HEX AN16 self-drilling screws and EPDM washer, reducing weight, perforations, and installation time without sacrificing rigidity or watertightness.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar system with microrail: fewer parts, simple logistics, and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and intermediate clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel fasteners.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules remain coplanar with the sheet.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixation thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and easy access for inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with metal roofs where fast installation, watertightness, and durability are required with a row of three modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e12 supports (min.) indicative; 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 4 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Place EPDM on all fixations and verify the equipotentiality of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet, 3 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency in installation time.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758756693,"sku":"ELEKEST011","price":48.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_281cff8a-dee2-4bbd-b64a-808b7a5ae5f2.png?v=1762625620"},{"product_id":"estructura-aluminio-coplanar-chapa-4-paneles","title":"Coplanar Aluminum Structure Sheet 4 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAluminum Coplanar Structure for Metal Roof, 4 Panels\u003c\/strong\u003e allows the installation of a coplanar row of four modules flush with the metal roof, securing the brackets on the ridge with HEX AN16 screws and EPDM washer. The 47×37 mm aluminum rail and universal clamps ensure structural continuity, cable routing, and a quick, robust, and watertight installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on the ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not fix on the valley.\u003c\/li\u003e\n  \u003cli\u003eRails with 2–3 connectors for continuity and controlled expansion.\u003c\/li\u003e\n  \u003cli\u003eAluminum profiles EN AW-6082; stainless steel fasteners A2\/A4.\u003c\/li\u003e\n  \u003cli\u003ePermissible slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration without raising the modules.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eWatertightness and durability in industrial and agricultural environments.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: annual inspection and retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and metal roofs where a reliable, watertight, and long-lasting solution is required for longer spans.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on metal sheet with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 6 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, clips\/grounding kit, cable glands, and EPDM tape. Increase bracket density at edges\/parapet and maintain expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Coplanar Structure for Metal Roof, 4 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation, improving the efficiency and lifespan of your photovoltaic system on a metal roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758822229,"sku":"ELEKEST004","price":116.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_14a07598-bece-4ca1-b1b9-aa9550353149.png?v=1762625623"},{"product_id":"estructura-aluminio-coplanar-chapa-4-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 4 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 4 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of four modules on a metal roof without continuous rails. The microrails are screwed onto the crest of the corrugation with HEX AN16 screws and EPDM washer, providing secure and sealed fastening while the universal clamps hold the 30–35 mm frame. Lightweight, quick, and highly durable solution.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e“Rail-less” system with microrail: less weight and fewer perforations.\u003c\/li\u003e\n  \u003cli\u003eDirect fastening on the crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frame modules; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eMaterials: EN AW-6082 aluminum and A2\/A4 stainless steel, anti-corrosion.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and lower visual impact.\u003c\/li\u003e\n  \u003cli\u003eAgile assembly with even distribution of loads and easy access to wiring.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at all fixings using EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and sandwich panel roofs where a watertight, lightweight, and modular solution is required for rows of four modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e16 supports (min.) indicative; 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 6 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Use EPDM under each fixing and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 4 Panels with Microrail\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the reliability and aesthetics of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759051605,"sku":"ELEKEST012","price":56.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_f255d065-393b-450e-a3a0-17a3cede2a91.png?v=1762625627"},{"product_id":"estructura-aluminio-coplanar-chapa-5-paneles","title":"Coplanar Aluminum Structure Sheet 5 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 5 Panels\u003c\/strong\u003e allows the installation of a coplanar row of five photovoltaic modules on metal roofs (corrugated\/trapezoidal sheet or sandwich panel). The system is fixed on the crest of the corrugation using HEX AN16 self-drilling screws with EPDM sealing washer and uses 47×37 mm aluminum rails to provide rigidity, cable routing, and structural continuity. The result is a robust, watertight, and visually integrated installation, with the modules flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 5 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on the crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never in the valley.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eProfiles in EN AW-6082 aluminum; A2\/A4 stainless steel anti-corrosion fasteners.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; cable routing through the rail channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration by keeping the modules coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with even load distribution over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life in industrial and agricultural environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panel roofs where a coplanar, watertight, robust, and quick-to-install system is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 self-drilling screws with EPDM washer (on crest)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Distribute the angles every 1.0–1.5 m and increase density at edges\/attic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 5 Panels\u003c\/strong\u003e ensures a professional, safe, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759149909,"sku":"ELEKEST005","price":144.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_e490c051-4bb5-4ba0-9a9d-91aa06f01a10.png?v=1762625632"},{"product_id":"estructura-aluminio-coplanar-chapa-5-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 5 Panels with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for 5 Panels with Microrail\u003c\/strong\u003e allows installation of a row of five modules on a metal roof without continuous rails. The microrails are fixed on the crest with HEX AN16 self-drilling screws and EPDM washer, reducing weight and perforations while maintaining robust, watertight, and visually integrated fastening.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer parts and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation by eliminating the continuous rail.\u003c\/li\u003e\n  \u003cli\u003eAesthetic coplanar integration and minimal roof intrusion.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panels where installation speed, watertightness, and durability are prioritized in rows of five modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e20 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and verify equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 5 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency during installation time.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for 5 Panels with Microrail\u003c\/strong\u003e allows installation of a row of five modules on a metal roof without continuous rails. The microrails are fixed on the crest with HEX AN16 self-drilling screws and EPDM washer, reducing weight and perforations while maintaining robust, watertight, and visually integrated fastening.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer parts and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation by eliminating the continuous rail.\u003c\/li\u003e\n  \u003cli\u003eAesthetic coplanar integration and minimal roof intrusion.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panels where installation speed, watertightness, and durability are prioritized in rows of five modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e20 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and verify equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 5 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency during installation time.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759641429,"sku":"ELEKEST013","price":64.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_9acfd2ac-a56d-4f22-a5b5-48431eaf4fdc.png?v=1762625636"},{"product_id":"estructura-aluminio-coplanar-chapa-6-paneles","title":"Coplanar Aluminum Structure Sheet 6 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 6 Panels\u003c\/strong\u003e is designed to form a coplanar row of six modules on metal roofs. Fixing is always done on the crest of the corrugation using HEX AN16 self-drilling screws with EPDM, while the 47×37 mm aluminum rails — joined with connectors — provide structural continuity, cable routing, and a fast, watertight installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 6 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixing on crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; expansion control at connectors.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform distribution of loads over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and high durability outdoors.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial, agricultural, and commercial buildings with corrugated sheet or sandwich panel roofs that require a watertight, robust, and modular solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 10 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 self-drilling screws with EPDM washer (on crest)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eUniversal 30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edge\/parapet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 6 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing the reliability and service life of your photovoltaic system on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759706965,"sku":"ELEKEST006","price":167.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_1e5b90c8-7f4b-45c6-8a6d-9f5d764c0d07.png?v=1762625639"},{"product_id":"estructura-aluminio-coplanar-chapa-6-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 6 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 6 Panels with Microrail\u003c\/strong\u003e arranges a coplanar row of six modules on metal roofs. The “rail-less” system secures microrails directly to the ridge using HEX AN16 screws with EPDM, reducing weight and perforations while providing secure, watertight, and quick installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: fewer components and reduced installation time.\u003c\/li\u003e\n  \u003cli\u003eRidge mounting with HEX AN16 + EPDM; expansion control per module.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum and A2\/A4 stainless steel anti-corrosion fasteners.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion into the metal sheet.\u003c\/li\u003e\n  \u003cli\u003eEven load distribution and easy access to wiring.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at every fixing point.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial, agricultural buildings and sandwich panel roofs that require speed, watertightness, and durability in six-module rows.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e24 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 10 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit, cable glands, and UV ties. Apply EPDM to all fixings and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 6 Panels with Microrail\u003c\/strong\u003e offers a clean, secure, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759870805,"sku":"ELEKEST014","price":72.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_e7800031-1294-4bb8-87d0-84fc25cbb4a0.png?v=1762625643"},{"product_id":"estructura-aluminio-coplanar-chapa-7-paneles","title":"Coplanar Aluminum Structure Sheet 7 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 7 Panels\u003c\/strong\u003e allows you to configure a coplanar row of seven modules on metal roofs (corrugated\/trapezoidal sheet or sandwich panel). Fixing is always done on the crest using HEX AN16 self-drilling screws with EPDM washer, while the 47×37 mm aluminum rails —joined with connectors— provide structural continuity, cable routing, and a quick, watertight, and visually integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 7 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eCrest fixing with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not fix in the valley.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules remain coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point and minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in industrial and agricultural environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for warehouses, storage buildings, and sandwich panel roofs that require a robust, watertight, and quick-to-install system with long spans per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 12 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edges\/attic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 7 Panels\u003c\/strong\u003e ensures a professional, safe, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759969109,"sku":"ELEKEST007","price":198.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_0cb41163-5ac0-4164-8cef-199c48e52dd2.png?v=1762625648"},{"product_id":"estructura-aluminio-coplanar-chapa-7-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 7 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 7 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of seven modules on corrugated metal roofs or sandwich panels with the minimum number of components. By dispensing with the continuous rail and using microrails fixed on the crest with HEX AN16 screws and EPDM washer, weight, perforations, and assembly time are reduced, while maintaining watertightness and structural rigidity.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e“Rail-less” system with microrail: less logistics and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with HEX AN16 screws + EPDM; never in the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with 30–35 mm frames using end and intermediate clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: aluminum EN AW-6082 and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eDesign resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules are coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixation thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and easy access to wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026amp;I buildings with corrugated sheet metal or sandwich panel roofs where long rows per string and fast, watertight, and durable installation are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e28 microrails (indicative minimum); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 12 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Apply EPDM to all fixations and verify equipotentiality of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 7 Panels with Microrail\u003c\/strong\u003e guarantees a professional, safe, and watertight installation, optimizing time and reliability on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760034645,"sku":"ELEKEST015","price":80.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_a668c665-3337-4209-a228-2176bfa744e0.png?v=1762625653"},{"product_id":"estructura-aluminio-coplanar-chapa-8-paneles","title":"Coplanar Aluminum Structure Sheet 8 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 8 Panels\u003c\/strong\u003e is designed for long rows of eight modules on metal roofs. The brackets are fixed to the ridge with HEX AN16 self-drilling screws and EPDM washer, and the 47×37 mm rails provide structural continuity, cable management, and a clean finish flush with the sheet metal.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 8 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eRails with multiple connectors for expansion control.\u003c\/li\u003e\n  \u003cli\u003eProfiles in EN AW-6082 aluminum; stainless steel A2\/A4 fasteners.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow calculation according to site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration with minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and long outdoor service life.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with corrugated sheet metal or sandwich panel roofs where a watertight, robust, and modular solution is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with bracket to ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 14 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute brackets every 1.0–1.5 m and reinforce around the perimeter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 8 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing the reliability and aesthetics of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760231253,"sku":"ELEKEST008","price":213.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_13b11303-e3e2-48b1-bc32-0a0134c63117.png?v=1762625656"},{"product_id":"estructura-aluminio-coplanar-chapa-8-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 8 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 8 Panels with Microrail\u003c\/strong\u003e is designed for long rows on metal roofs. The “rail-less” system secures microrails directly to the ridge with HEX AN16 self-drilling screws and EPDM washer, avoiding continuous rails and improving on-site productivity without compromising structural safety or watertightness.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: fewer profiles, lower weight, and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eRidge mounting with HEX AN16 + EPDM; expansion control per module.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames (end and intermediate clamps).\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and safe installation with even distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial buildings, warehouses, and sandwich panel roofs seeking a watertight, lightweight, and modular solution with eight modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e32 microrails (minimum indicative); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 14 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Use EPDM on all fixings and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 8 Panels with Microrail\u003c\/strong\u003e offers a clean, fast, and durable installation, maximizing the reliability and aesthetics of your photovoltaic system on a metal roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760264021,"sku":"ELEKEST016","price":87.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_6065cc73-e67c-4eba-88f5-bb6c6e0b4765.png?v=1762625660"},{"product_id":"estructura-aluminio-coplanar-chapa-9-paneles","title":"Coplanar Aluminum Structure Sheet 9 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 9 Panels\u003c\/strong\u003e allows the installation of a coplanar row of nine modules on a metal roof, with crest fixation using HEX AN16 screws and EPDM washer. The 47×37 mm rails are joined with connectors to provide structural continuity, expansion control, and cable routing, achieving a robust, watertight, and discreetly integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 9 modules with 30–35 mm frame.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never in the valley.\u003c\/li\u003e\n  \u003cli\u003e47×37 mm rail with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum and A2\/A4 stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow load calculation according to zone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eQuick assembly with uniform distribution of forces over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and reduced maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and sandwich panel roofs that require a watertight, robust, and quick-to-install solution with a large number of modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 16 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Densify angles at edges and central section to limit deflection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 9 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation on large metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760362325,"sku":"ELEKEST009","price":235.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_480b22b0-4767-4ece-b5e8-d0201e1e2dbb.png?v=1762625665"},{"product_id":"estructura-aluminio-coplanar-chapa-9-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 9 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAluminum Coplanar Structure for Metal Sheet 9 Panels with Microrail\u003c\/strong\u003e configures a coplanar row of nine modules on corrugated metal roofs or sandwich panels with a “rail-less” system that eliminates the continuous rail. Each microrail is fixed on the crest using HEX AN16 self-drilling screws with EPDM washer, reducing weight, perforations, and installation time without compromising watertightness or mechanical strength. The universal clamps for 30–35 mm frames ensure a solid and continuous attachment between modules, while the coplanar design offers a clean and integrated finish.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail system \u003cem\u003ewithout rail\u003c\/em\u003e: fewer parts, simplified logistics, and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: aluminum EN AW-6082 and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration: the modules remain coplanar with the metal sheet.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail-based solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM on all fixings.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and easy access to wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with large metal sheet or sandwich panel surfaces where installation speed, watertightness, and durability are priorities.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e36 microrails (min.); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 16 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Place EPDM on each fixing and verify the equipotentiality of the row. For long surfaces, consider dividing into 5+4 or 3+3+3 to optimize assembly and load distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Coplanar Structure for Metal Sheet 9 Panels with Microrail\u003c\/strong\u003e guarantees a professional, watertight, and durable installation, maximizing productivity and reliability on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760460629,"sku":"ELEKEST017","price":95.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_08dbd26f-9470-4fd5-904f-0b19f978ad33.png?v=1762625669"}],"url":"https:\/\/aurensol.net\/en\/collections\/estructuras-cubierta-metalica.oembed","provider":"Aurensol","version":"1.0","type":"link"}