{"title":"Coplanar Structures","description":"\u003ch2\u003eWhat are coplanar structures for solar panels?\u003c\/h2\u003e\n\u003cp\u003eCoplanar structures are systems of profiles and anchors that allow solar panels to be installed \u003cem\u003eparallel\u003c\/em\u003e to the plane of a pitched roof. Their purpose is to safely transfer wind and snow loads to the structural support, preserve the watertightness of the roof, and maintain rear ventilation of the module for stable performance. Within the general family of \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003estructures for solar panels\u003c\/a\u003e, coplanar types are the preferred option on pitched roofs due to their aesthetic integration and low aerodynamic impact.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages and limitations\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiscreet integration\u003c\/strong\u003e: by following the slope of the roof, they minimize visual impact and shading.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLower wind load\u003c\/strong\u003e: they reduce uplift and stresses compared to inclined racks.\u003c\/li\u003e\n  \u003cli\u003eFast installation: pre-drilled rails and universal clamps speed up assembly.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: solutions for curved\/flat tile, slate, concrete, or fiber cement.\u003c\/li\u003e\n  \u003cli\u003eLimitations: the roof angle determines the tilt of the PV array; if energy optimization is sought, a solution for \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003eflat roof or ground\u003c\/a\u003e may be preferable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-family homes and townhouses with gable roofs.\u003c\/li\u003e\n  \u003cli\u003eCommercial buildings with pitched roofs where aesthetics are a priority.\u003c\/li\u003e\n  \u003cli\u003eRenovations where minimal intervention and maximum watertightness are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose the right solution\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType of roof\u003c\/strong\u003e: hooks for tile, through-bolts in concrete\/wood, or specific supports for fiber cement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad-bearing structure\u003c\/strong\u003e: locate beams\/rafters for anchoring; avoid weak or deteriorated areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWind zone and height\u003c\/strong\u003e: affect edge spacing and anchor density.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModule compatibility\u003c\/strong\u003e: frame height (e.g., 30–40 mm) and support spacing according to the technical datasheet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable management\u003c\/strong\u003e: protected routes, roof penetrations, and UV protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eStructural aluminium (profiles\/clamps) and stainless steel A2\/A4 (fasteners)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to roof\u003c\/td\u003e\n\u003ctd\u003eTile hooks, through-bolts, or specific supports with EPDM gaskets\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCompatible frame height\u003c\/td\u003e\n\u003ctd\u003eApprox. 30–40 mm with universal mid and end clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDesign standards\u003c\/td\u003e\n\u003ctd\u003eEurocodes for wind\/snow and manufacturer guidelines\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eAnodized treatments and anti-corrosion fasteners for marine\/industrial environments\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003ePeriodic retightening and inspection of seals and anchor points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBest practices\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePlan anchor points on a load-bearing structure; do not fix onto tile without transferring load to rafters.\u003c\/li\u003e\n  \u003cli\u003eUse certified flashings and sealants to ensure \u003cstrong\u003ewatertightness\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eRespect tightening torques and edge distances according to wind calculations.\u003c\/li\u003e\n  \u003cli\u003eEnsure rear ventilation of the module and avoid supports on tile edges.\u003c\/li\u003e\n  \u003cli\u003eRoute and secure cabling with UV-resistant clamps and anti-abrasion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuick comparisons\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoplanar\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003e\u003cstrong\u003eflat roof\/ground\u003c\/strong\u003e\u003c\/a\u003e: coplanar prioritizes integration and lower wind load; flat\/ground allows optimization of the tilt angle for higher yield.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoplanar\u003c\/strong\u003e vs \u003ca href=\"\/en\/collections\/estructuras-cubierta-metalica\"\u003e\u003cstrong\u003emetal roof\u003c\/strong\u003e\u003c\/a\u003e: for sheet metal, specific fixings with self-drilling screws and EPDM gaskets are recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated accessories\u003c\/h3\u003e\n\u003cp\u003eComplete the installation with compatible \u003ca href=\"\/en\/collections\/accesorios-estructuras\"\u003eclamps, connectors, rails, end caps, and fasteners\u003c\/a\u003e. For a comprehensive overview of options by support type, see the main collection \u003ca href=\"\/en\/collections\/estructuras-paneles-solares\"\u003eStructures for Solar Panels\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eIf your project is not for a pitched roof, explore alternatives: \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003eStructures for Ground and Flat Roof\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/estructuras-cubierta-metalica\"\u003eStructures for Metal Roof\u003c\/a\u003e. With the correct selection and suitable accessories, a \u003cstrong\u003ecoplanar structure\u003c\/strong\u003e offers safety, durability, and a professional finish throughout the entire service life of the PV system.\u003c\/p\u003e","products":[{"product_id":"estructura-aluminio-coplanar-salvatejas-1-panel","title":"Coplanar Aluminum Structure Salvatejas 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 1 Panel\u003c\/strong\u003e is a flush-mounting system that uses a salvateja hook screwed to the beam to secure a photovoltaic module on curved, mixed, or flat tiles. Manufactured from aluminum and stainless steel fasteners, it offers secure installation, EPDM sealing, and aesthetic integration without raising the panel.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hook screwed to the beam (never to the tile) with stainless steel screws A2 8×100\/120.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eProfiles made of aluminum EN AW-6082 and stainless steel fasteners A2\/A4 for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and secure installation, with EPDM sealing and discreet visual integration.\u003c\/li\u003e\n  \u003cli\u003eReliable load distribution and resistance to wind and snow as dimensioned.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile roofs on beams or battens in residential and commercial buildings requiring a coplanar, robust, and architecturally integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fastening\u003c\/td\u003e\n\u003ctd\u003eSalvateja hook to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel fasteners A2\/A4; EPDM washer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eThis product is compatible with end\/intermediate clamps 30\/35 mm, rail connectors, grounding clips, cable glands, and UV ties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 1 Panel\u003c\/strong\u003e is a professional solution for tile roofs that maximizes safety, durability, and aesthetic integration.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760657237,"sku":"ELEKEST019","price":85.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1.png?v=1762625673"},{"product_id":"estructura-aluminio-coplanar-salvatejas-2-paneles","title":"Coplanar Aluminum Structure Salvatejas 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 2 Panels\u003c\/strong\u003e allows mounting a row of two modules on a tiled roof using salvateja hooks screwed to the beam. The system, made of aluminum with stainless steel screws, ensures robust fastening, equipotential continuity, and EPDM sealing, keeping the panels flush with the roof for discreet integration.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hooks fixed to the beam with stainless steel A2 8×100\/120 screws.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and rail connector if required.\u003c\/li\u003e\n  \u003cli\u003eProfiles made of aluminum EN AW-6082 and stainless steel A2\/A4 screws.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and safe installation with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eNeat appearance as the modules are coplanar with the tiles.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to corrosion and weathering; minimal maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for pitched roofs with curved\/mixed\/flat tiles in residential and commercial buildings seeking structural reliability and architectural integration.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fastening\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel screws A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and UV ties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 2 Panels\u003c\/strong\u003e offers a clean, safe, and durable installation, enhancing the aesthetics and reliability of the roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760853845,"sku":"ELEKEST020","price":97.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_a7abe9d5-dfb4-4360-b1ac-ac379a885bcc.png?v=1762625675"},{"product_id":"estructura-aluminio-coplanar-salvatejas-3-paneles","title":"Coplanar Aluminum Structure Salvatejas 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 3 Panels\u003c\/strong\u003e allows the installation of a coplanar row of three photovoltaic modules on curved, mixed, or flat tile roofs, fixing each point to the beam using salvateja hooks. The system, manufactured from EN AW-6082 aluminum with A2\/A4 stainless steel screws, keeps the panels flush with the roof for impeccable aesthetic integration and ensures watertightness at each anchor point using EPDM washers.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hook screwed to beam with A2 stainless steel screws 8×100\/120 (never to the tile).\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail \u003cstrong\u003e47×37 mm\u003c\/strong\u003e with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and A2\/A4 stainless steel; watertightness with EPDM.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet visual integration as the modules are coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eQuick and secure installation with even distribution of loads between hooks.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to wind and snow as dimensioned; low maintenance requirements.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity via rail and ground clip per module for electrical safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched tile roofs on beams or battens in residential and commercial buildings seeking a durable, watertight, and architecturally integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fixing\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eEN AW-6082 aluminum; A2\/A4 stainless steel screws; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, ground clips\/kit, cable glands, and UV ties. Leave gaps in connectors for expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 3 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the aesthetics and reliability of your photovoltaic installation on tile roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761181525,"sku":"ELEKEST021","price":144.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_266db219-ae68-496e-b8ad-97efc163f89b.png?v=1762625678"},{"product_id":"estructura-aluminio-coplanar-salvatejas-4-paneles","title":"Coplanar Aluminum Structure Salvatejas 4 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 4 Panels\u003c\/strong\u003e is designed to fix a coplanar row of four modules on curved, mixed, or flat tile roofs. Each salvateja hook is screwed directly to the beam (never to the tile) with stainless steel screws, and the coplanar rail 47×37 mm provides structural continuity and cable routing. The result is a robust installation, watertight thanks to EPDM, and visually integrated as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eFixing with salvateja hooks and \u003cstrong\u003estainless steel screws 8×100\/120\u003c\/strong\u003e to the beam.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; 2–3 connectors distributed according to span.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum profiles; A2\/A4 stainless steel screws; EPDM washers.\u003c\/li\u003e\n  \u003cli\u003eAdmissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration without protruding from the plane of the tile.\u003c\/li\u003e\n  \u003cli\u003eHomogeneous load distribution and greater rigidity over long spans.\u003c\/li\u003e\n  \u003cli\u003eHigh durability and minimal maintenance due to anti-corrosion materials.\u003c\/li\u003e\n  \u003cli\u003eElectrical safety with rail equipotentiality and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for homes and businesses with tile roofs that require a reliable, discreet, and long-lasting solution, with wind and snow resistance dimensioned.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fixing\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eEN AW-6082 aluminum; A2\/A4 stainless steel screws; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and UV ties. Reinforce the number of hooks in edge\/attic areas and maintain expansion joints in connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 4 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation, improving the safety and durability of your tile roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761279829,"sku":"ELEKEST022","price":175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_54324cf2-ca29-4558-a5a8-efc7a8a8abc5.png?v=1762625679"},{"product_id":"estructura-aluminio-coplanar-tornillo-1-panel","title":"Coplanar Aluminum Structure Screw 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 1 Panel\u003c\/strong\u003e is a flush mounting system for a photovoltaic module, designed for pitched roofs with tile, wood, or concrete. It combines anodized aluminum profiles and stainless steel fasteners with a D:10 self-drilling screw and adapter angle, achieving a secure, watertight, and durable installation without raising the panel above the roof surface.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eCoplanar fastening with D:10 self-drilling screw and EPDM washer for watertightness.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eStructural aluminum profiles and stainless steel fasteners A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eQuick, clean installation with equipotential continuity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the module remains flush with the roof.\u003c\/li\u003e\n  \u003cli\u003eDirect and robust fastening, suitable for wind and snow loads.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance thanks to anti-corrosion materials.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing with EPDM at each anchoring point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eEspecially suitable for pitched roofs with curved\/mixed\/flat tile, fiber cement on battens, wood, or concrete. Suitable for homes and businesses where a discreet, secure, and architecturally integrated installation is prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel fasteners A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kits, UV cable glands, and anti-slip stops. Use EPDM washer at each D:10 point for watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 1 Panel\u003c\/strong\u003e is the professional solution for fixing your module in a discreet, secure, and durable way, optimizing roof space and aesthetics.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761312597,"sku":"ELEKEST023","price":66.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1.png?v=1762625682"},{"product_id":"estructura-aluminio-coplanar-tornillo-10-paneles","title":"Coplanar Aluminum Structure Screw 10 Panels","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 10 Panels\u003c\/strong\u003e is designed to form a coplanar row of ten modules fixed directly to the roof using a self-drilling screw D:10 and adapter angle. The system uses anodized aluminum profiles with stainless steel A2\/A4 screws and EPDM washers at each anchor point, achieving a robust, watertight, and visually integrated installation as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fastening: self-drilling screw D:10 + adapter angle and EPDM per point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail with grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eAgile and secure assembly with uniform distribution of loads over long spans.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to wind and snow loads; minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM at all anchoring points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for pitched roofs with curved\/mixed\/flat tiles, fiber cement on battens, wood, or concrete in residential and commercial installations requiring a discreet, safe, and durable solution with a large number of modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and mid clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. For long sections, distribute D:10 anchors at edges and central areas, and leave expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure with Screw for 10 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the reliability and aesthetics of large-format photovoltaic systems on pitched roofs.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761541973,"sku":"ELEKEST032","price":295.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_36bfeff8-0a6a-448b-9740-2db54f82e8ae.png?v=1762625684"},{"product_id":"estructura-aluminio-coplanar-tornillo-2-paneles","title":"Coplanar Aluminum Structure Screw 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 2 Panels\u003c\/strong\u003e allows the installation of a coplanar row of two photovoltaic modules on pitched roofs with direct fastening using a D:10 self-drilling screw and adapter angle. The system, made of anodized aluminum with stainless steel screws, offers quick assembly, watertightness with EPDM, and an aesthetic flush integration with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fastening with D:10 self-drilling screw + EPDM washer for sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eMaterials: structural anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity through rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAgile and robust installation with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eDiscreet finish as the modules are coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to corrosion and weather agents; minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at each point thanks to EPDM and adapter angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for curved\/mixed\/flat tile roofs, fiber cement on battens, wood or concrete, in homes and businesses where integrated aesthetics, safety, and durability are prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 2 Panels\u003c\/strong\u003e is the professional solution for discreet, safe, and durable installation on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761607509,"sku":"ELEKEST024","price":74.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_2e2a2403-6188-4c3a-bdbd-d6acb3d1e91d.png?v=1762625688"},{"product_id":"estructura-aluminio-coplanar-tornillo-3-paneles","title":"Coplanar Aluminum Structure Screw 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 3 Panels\u003c\/strong\u003e forms a coplanar row of three photovoltaic modules fixed directly to the roof with a D:10 self-drilling screw and adapter angle. The assembly uses anodized aluminum profiles and stainless steel fasteners, ensuring watertightness with EPDM, high rigidity, and a clean visual integration without raising the panels.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fixing with adapter angle and EPDM washer for sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and inox A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration into the roof, reducing visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly, with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eLong service life and low maintenance in demanding environments.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at all anchoring points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile, fiber cement on batten, wood, or concrete roofs in residential and commercial installations that require a discreet, robust, and durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; inox A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 3 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing safety, aesthetics, and durability on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761705813,"sku":"ELEKEST025","price":113.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_047f776c-f8ce-4858-a6d5-ae9b312355f2.png?v=1762625690"},{"product_id":"estructura-aluminio-coplanar-tornillo-4-paneles","title":"Coplanar Aluminum Structure Screw 4 Panels","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 4 Panels\u003c\/strong\u003e forms a coplanar row of four modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. Manufactured from anodized aluminum with stainless steel fasteners, it ensures watertightness with EPDM washer, high mechanical strength, and aesthetic integration as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect D:10 fastening with adapter angle and EPDM sealing at each point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnodized structural aluminum profiles; stainless steel A2\/A4 fasteners.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity per rail and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet visual integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eQuick and robust assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eLong service life due to anti-corrosion materials and reliable sealing.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for pitched roofs with curved\/mixed\/flat tiles, fiber cement on battens, wood, or concrete in residential and commercial installations prioritizing aesthetics, safety, and architectural integration.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with self-drilling screw D:10 + adapter bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Use EPDM washer at each D:10 point to ensure watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure with Screw for 4 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing roof space and aesthetics.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761804117,"sku":"ELEKEST026","price":132.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_411e0821-c921-4803-9efa-5acec7bea611.png?v=1762625693"},{"product_id":"estructura-aluminio-coplanar-tornillo-5-paneles","title":"Coplanar Aluminum Structure Screw 5 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 5 Panels\u003c\/strong\u003e allows the installation of a coplanar row of five photovoltaic modules with direct fastening to the support using a D:10 self-drilling screw and adapter angle. The system combines anodized aluminum profiles and stainless steel screws to provide high resistance, watertightness with EPDM, and a discreet finish as the panels are integrated into the plane of the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 5 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fastening with adapter angle and EPDM washer at each anchor point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; multiple connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential bonding per rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and robust installation with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eHigh durability against weather, wind, and rated snow loads.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance thanks to EPDM seals and quality fastenings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of tile, fiber cement on batten, wood, or concrete in residential and commercial buildings seeking a discreet, safe, and integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 5 Panels\u003c\/strong\u003e offers a professional and durable installation, optimizing the aesthetics and reliability of your pitched roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761869653,"sku":"ELEKEST027","price":159.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_b49b732b-4bc0-401f-954c-289af0bcd8c2.png?v=1762625696"},{"product_id":"estructura-aluminio-coplanar-tornillo-6-paneles","title":"Coplanar Aluminum Structure Screw 6 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 6 Panels\u003c\/strong\u003e creates a coplanar row of six modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. With anodized aluminum profiles and stainless steel screws, it ensures watertightness with EPDM, high mechanical resistance, and an aesthetic integration as the panels remain flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 6 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation D:10 with adapter angle and EPDM sealing at each point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity through rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFast and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eDiscreet visual integration as it remains coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eLong service life and reduced maintenance thanks to EPDM and stainless steel.\u003c\/li\u003e\n  \u003cli\u003eReliable performance in wind and snow-rated climates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of tile, fiber cement on batten, wood, or concrete in residential and commercial buildings seeking a discreet, safe, and durable solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 6 Panels\u003c\/strong\u003e offers a professional, reliable, and aesthetic installation for pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761967957,"sku":"ELEKEST028","price":190.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_4550ce72-43b3-4164-bf46-4490fd165110.png?v=1762625698"},{"product_id":"estructura-aluminio-coplanar-tornillo-7-paneles","title":"Coplanar Aluminum Structure Screw 7 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 7 Panels\u003c\/strong\u003e allows the installation of a coplanar row of seven modules with direct fastening to the support using a D:10 self-drilling screw and adapter angle. The assembly, made of anodized aluminum with stainless steel screws, ensures watertightness with EPDM, high structural rigidity, and a clean visual integration without raising the panels.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 7 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fastening with adapter angle and EPDM washer for durable sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eMaterials: anodized aluminum and A2\/A4 stainless steel; high corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail with ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life in demanding environments.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at each anchor point thanks to EPDM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile, fiber cement on batten, wood, or concrete roofs in residential and commercial installations that prioritize aesthetics, safety, and durability.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, ground clips\/kit, UV cable glands, and anti-slip stops. Apply EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 7 Panels\u003c\/strong\u003e ensures a clean and professional assembly, optimizing the reliability and aesthetics of your photovoltaic installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762000725,"sku":"ELEKEST029","price":209.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_450618af-42f7-4c0b-9c17-de7f98beaa57.png?v=1762625699"},{"product_id":"estructura-aluminio-coplanar-tornillo-8-paneles","title":"Coplanar Aluminum Structure Screw 8 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 8 Panels\u003c\/strong\u003e allows the installation of a coplanar row of eight photovoltaic modules fixed directly to the roof with a D:10 self-drilling screw and adapter angle. Its design prioritizes aesthetic integration—the panels are flush with the roof—without sacrificing structural safety. Manufactured with anodized aluminum profiles and A2\/A4 stainless steel screws, it ensures corrosion resistance, quick assembly, and watertightness through EPDM washers at each anchoring point.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 8 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixing: D:10 self-drilling screw + adapter angle and EPDM washer.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail; grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules are coplanar.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eHigh rigidity against wind and snow loads.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance thanks to EPDM and stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of curved\/mixed\/flat tile, fiber cement on batten, wood, or concrete in residential and commercial buildings that prioritize aesthetics, safety, and system durability.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Apply EPDM at each D:10 point and leave joints in connectors for expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 8 Panels\u003c\/strong\u003e guarantees a professional, reliable, and aesthetic installation, optimizing the safety and service life of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762164565,"sku":"ELEKEST030","price":235.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_ec4f2a3a-f69b-4b13-90cd-276153c37ebc.png?v=1762625701"},{"product_id":"estructura-aluminio-coplanar-tornillo-9-paneles","title":"Coplanar Aluminum Structure Screw 9 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 9 Panels\u003c\/strong\u003e is designed to form a coplanar row of nine modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. The assembly combines anodized aluminum profiles with A2\/A4 stainless steel screws, offering watertightness with EPDM, high stability against wind\/snow loads, and a clean visual integration as the panels remain flush with the roof surface.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 9 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect D:10 fixing with adapter angle and EPDM washer at each anchor point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eMaterials: high-durability anodized aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity via rail; grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environments thanks to EPDM and stainless steel.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for pitched roofs of tile, fiber cement on battens, wood, or concrete in residential and commercial installations seeking a discreet, safe, and durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Distribute D:10 anchors on edges and central sections; leave expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 9 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing reliability, aesthetics, and durability on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762426709,"sku":"ELEKEST031","price":272.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_cef4f647-d960-4c22-be43-358630b80cf1.png?v=1762625704"}],"url":"https:\/\/aurensol.net\/en\/collections\/estructuras-coplanares.oembed","provider":"Aurensol","version":"1.0","type":"link"}