{"title":"Eleksol","description":"\u003ch2\u003eWhat is Eleksol and what solutions does it offer?\u003c\/h2\u003e\n\u003cp\u003eEleksol is a brand focused on photovoltaic storage and mounting. In batteries, it covers everything from \u003cstrong\u003eLiFePO4 12.8 V\u003c\/strong\u003e models with BMS and Bluetooth connectivity (100–400 Ah, IP65) to sealed \u003cstrong\u003eAGM\u003c\/strong\u003e and \u003cstrong\u003eGEL\u003c\/strong\u003e ranges, maintenance-free and with long service life. For structures, it offers coplanar systems for tile and sheet metal roofs—including \u003cem\u003emicrorail\u003c\/em\u003e—and inclined supports for \u003cstrong\u003eground\/flat roof\u003c\/strong\u003e at 30°, made of structural aluminum for quick and durable installation.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety and service life\u003c\/strong\u003e: LiFePO4 batteries with BMS; sealed, maintenance-free AGM\/GEL.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e: lithium models with Bluetooth for SOC reading and key parameters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgile installation\u003c\/strong\u003e: EN AW 6082 aluminum structures, compatible rails and accessories.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: solutions for curved tile (salvatejas), trapezoidal sheet metal (\u003cem\u003emicrorail\u003c\/em\u003e), and flat ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLimitations and notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLead batteries (AGM\/GEL) are heavier and support lower C-rate than lithium; size for peak currents.\u003c\/li\u003e\n  \u003cli\u003eCheck anchor compatibility with the type of roof and local \u003cstrong\u003ewind\/snow\u003c\/strong\u003e loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eResidential self-consumption with \u003ca href=\"\/en\/collections\/baterias-litio-12V\"\u003e12 V lithium batteries\u003c\/a\u003e and monitoring.\u003c\/li\u003e\n  \u003cli\u003eUPS systems, telecommunications, and control with \u003ca href=\"\/en\/collections\/baterias-agm\"\u003eAGM\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/baterias-gel\"\u003eGEL\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eInstallations on \u003ca href=\"\/en\/collections\/estructuras-coplanares\"\u003epitched roof\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/estructuras-cubierta-metalica\"\u003emetal roof\u003c\/a\u003e, and \u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003eground\/flat roof\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e: lithium (weight\/cycles\/deep discharges) vs AGM\/GEL (cost\/robustness and occasional use).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: calculate daily Wh and target DoD (e.g., 50–80% for lithium) to determine required Ah.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructure\u003c\/strong\u003e: select by roof type (salvatejas, sheet metal with \u003cem\u003emicrorail\u003c\/em\u003e, or flat ground 30°) and available orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIndicative specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLithium batteries 12.8 V\u003c\/td\u003e\n\u003ctd\u003eLiFePO4 100–400 Ah, BMS, Bluetooth, IP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAGM batteries 12 V\u003c\/td\u003e\n\u003ctd\u003e250–300 Ah, sealed, cyclic\/UPS use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eGEL batteries 12 V\u003c\/td\u003e\n\u003ctd\u003e100–300 Ah, sealed, deep cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTile structures\u003c\/td\u003e\n\u003ctd\u003eSalvatejas with hook and rail, EN AW 6082 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSheet metal structures\u003c\/td\u003e\n\u003ctd\u003e\u003cem\u003eMicrorail\u003c\/em\u003e fixing without rail, wind resistance up to 150 km\/h*\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eGround\/flat roof\u003c\/td\u003e\n\u003ctd\u003e30° inclination, mechanical\/chemical M10 anchoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:0.9em\"\u003e*According to model and structural calculation of the project.\u003c\/p\u003e\n\n\u003ch3\u003eBest practices\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor lithium, configure the BMS and integrate monitoring to control SOC and cycles.\u003c\/li\u003e\n  \u003cli\u003eFor AGM\/GEL, respect charging voltages and local ventilation.\u003c\/li\u003e\n  \u003cli\u003eFor structures, carry out layout, set tightening torque, seal perforations, and check for expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated collections\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/baterias-litio-12V\"\u003e12 V Lithium Batteries\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/baterias-agm\"\u003eAGM Batteries\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/baterias-gel\"\u003eGEL Batteries\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/estructuras-coplanares\"\u003eCoplanar Structures\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/estructuras-cubierta-metalica\"\u003eStructures for Metal Roof\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en\/collections\/estructuras-suelo-tejado-plano\"\u003eStructures for Ground and Flat Roof\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol\u003c\/strong\u003e provides a balanced ecosystem: reliable storage and professional mounting structures to build durable and easy-to-maintain solar systems.\u003c\/p\u003e","products":[{"product_id":"bateria-agm-eleksol-12v-300ah-6gfm300","title":"Eleksol AGM Battery 12V 250Ah 6GFM250","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAGM Eleksol Battery 12V 250Ah 6GFM250\u003c\/strong\u003e is a valve-regulated lead-acid (VRLA) monoblock battery with sealed AGM technology, designed for reliable storage in off-grid solar systems, UPS, telecommunications, and 12 V self-consumption applications. Its maintenance-free construction, low self-discharge, and excellent performance under moderate to deep discharge ensure service continuity, safety, and ease of installation even in remote locations.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed AGM VRLA technology: no water addition required, minimal emissions, and clean installation.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e250 Ah (C100)\u003c\/strong\u003e for extended autonomy in continuous consumption.\u003c\/li\u003e\n  \u003cli\u003eEstimated float life \u0026gt;10 years; self-discharge approx. 3%\/month at 25 °C.\u003c\/li\u003e\n  \u003cli\u003eMax. discharge current (5 s) ≈ 2400 A; internal resistance ≈ 3.0 mΩ.\u003c\/li\u003e\n  \u003cli\u003eM8 terminal and robust ABS container for secure connections and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple installation in monoblock format, with reduced wiring complexity.\u003c\/li\u003e\n  \u003cli\u003eSafe and clean operation: sealed design reduces risk of spills and gases.\u003c\/li\u003e\n  \u003cli\u003eStable float performance and good support for surges with 12 V inverters.\u003c\/li\u003e\n  \u003cli\u003eOptimized cost for occasional or moderately demanding cycle applications.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V IUoU chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for residential or rural 12 V solar installations (lighting, routers, cameras, small efficient refrigerators), UPS\/SAI backup, control and telemetry centers, emergency lighting, and hybrid wind-solar systems. Also suitable as auxiliary power in special vehicles or technical cabins where low maintenance and continuous availability are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 3.0 kWh (12 V × 250 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e250 Ah (C100)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eSealed AGM VRLA, maintenance-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eMonoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e522 × 240 × 219\/222 mm (L × W × H\/Total H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 57 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 3%\/month at 25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 3.0 mΩ (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 2400 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFloat voltage\u003c\/td\u003e\n\u003ctd\u003e13.5–13.8 V (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCyclic voltage\u003c\/td\u003e\n\u003ctd\u003e14.4–15.0 V (recommended 14.7 V at 25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003erec. 20 A · max. 50 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~50 °C · Charge −20~50 °C · Storage −20~50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configured for AGM\/VRLA profile with adjustable voltages; MPPT is recommended when using 60\/120\/144 cell modules or strings with Vmp \u0026gt; 18 V. Works with 12 V AC-DC chargers applying IUoU curve and, preferably, temperature probe. Suitable for 12 V pure sine wave inverters within the bank's capacity: with one unit, up to ~800–1200 W continuous; for higher power or demanding surges, increase Ah in parallel (symmetrical wiring) or raise system voltage to 24\/48 V. Can be connected in series with identical 6GFM250 units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAGM Eleksol Battery 12V 250Ah 6GFM250\u003c\/strong\u003e offers a professional, safe, and durable solution for renewable energy projects requiring autonomy, reliability, and zero maintenance, optimizing total cost of ownership and the efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755217749,"sku":"ELEKBAT001","price":284.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-AGM-250.png?v=1762625545"},{"product_id":"bateria-gel-eleksol-12v-100ah-6gfm100g","title":"Eleksol AGM Battery 12V 300Ah 6GFM300","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAGM Eleksol Battery 12V 300Ah 6GFM300\u003c\/strong\u003e is a VRLA lead-acid monoblock with AGM separator, sealed and maintenance-free, designed for off-grid solar systems, UPS\/SAI, and telecommunications. It offers great autonomy, low self-discharge, and excellent performance under moderate to deep discharge, with clean and safe installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed AGM VRLA technology: no water addition, minimal emissions, and safe use.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e300 Ah (C100)\u003c\/strong\u003e for high autonomy and stable backup.\u003c\/li\u003e\n  \u003cli\u003eEstimated lifespan \u0026gt;10 years in float; self-discharge ≈ 3 %\/month at 25 °C.\u003c\/li\u003e\n  \u003cli\u003eMax. discharge current (5 s) ≈ 3000 A; internal resistance ≈ 2.8 mΩ.\u003c\/li\u003e\n  \u003cli\u003eM8 terminal and robust ABS casing; dimensions 520×268×220\/223 mm; weight ≈ 68 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple installation in monoblock format: less cabling and lower complexity.\u003c\/li\u003e\n  \u003cli\u003eReliable and clean operation, ideal for remote or hard-to-access locations.\u003c\/li\u003e\n  \u003cli\u003eHandles peaks with 12 V inverters and maintains good performance in float mode.\u003c\/li\u003e\n  \u003cli\u003eOptimized cost for occasional or moderately demanding cycle applications.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V IUoU chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for 12 V solar installations (lighting, efficient refrigerators, routers, cameras), UPS\/SAI backup, control and telemetry, emergency lighting, and hybrid wind-solar systems. Also useful as auxiliary power in technical cabins and automatic control equipment.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 3.6 kWh (12 V × 300 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e300 Ah (C100) · 250 Ah (C10) · 221.5 Ah (C5) · 164 Ah (C1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eSealed AGM VRLA, maintenance-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e520 × 268 × 220\/223 mm (L × W × H\/Total H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 68 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 2.8 mΩ (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 3 %\/month at 25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 3000 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFloat voltage\u003c\/td\u003e\n\u003ctd\u003e13.5–13.8 V (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCyclic voltage\u003c\/td\u003e\n\u003ctd\u003e14.4–15.0 V (rec. 14.7 V at 25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003erec. 25 A · max. 62.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~50 °C · Charge −20~50 °C · Storage −20~50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configured in AGM\/VRLA profile with adjustable voltages; MPPT recommended with 60\/120\/144 cell modules or strings with Vmp \u0026gt; 18 V. Works with 12 V AC-DC chargers applying IUoU curve and temperature probe. Suitable for pure sine wave 12 V inverters within the bank's capacity: with one unit, comfortable use up to ~800–1200 W continuous; for higher power or demanding peaks, increase Ah in parallel (symmetrical cabling) or raise the system voltage to 24\/48 V. Can be connected in series with identical 6GFM300 units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAGM Eleksol Battery 12V 300Ah 6GFM300\u003c\/strong\u003e is a professional and safe solution for renewable energy projects seeking maximum autonomy, reliability, and zero maintenance, optimizing the performance and efficiency of your installation.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755414357,"sku":"ELEKBAT002","price":336.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-AGM-300.png?v=1762625545"},{"product_id":"bateria-gel-eleksol-12v-180ah-6gfm180g","title":"Eleksol Gel Battery 12V 100Ah 6GFM100G","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Gel Battery 12V 100Ah 6GFM100G\u003c\/strong\u003e is a monoblock VRLA with gelled electrolyte, sealed and maintenance-free, designed for solar energy, telecommunications, and UPS. It offers high thermal stability, very low self-discharge, and reliable performance in moderate cycles, enabling a clean and safe installation in 12 V systems with direct DC consumption or through an inverter.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed Gel VRLA technology: safe operation, no water addition or equalization required.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e100 Ah (C100)\u003c\/strong\u003e for backup and small continuous loads.\u003c\/li\u003e\n  \u003cli\u003eDesign life in float ≥ 12 years; self-discharge ~3 %\/month at 25 °C.\u003c\/li\u003e\n  \u003cli\u003eM6 terminal and ABS case; dimensions 307×168×211\/214 mm; weight ≈ 28.5 kg.\u003c\/li\u003e\n  \u003cli\u003eExcellent thermal behavior and voltage stability under moderate discharge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eZero maintenance: reduces costs and site visits in remote locations.\u003c\/li\u003e\n  \u003cli\u003eSimple installation in monoblock format; simplified wiring and protections.\u003c\/li\u003e\n  \u003cli\u003eSafety and cleanliness: minimal emissions and suitable for indoor use.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V IUoU chargers.\u003c\/li\u003e\n  \u003cli\u003eReliability in UPS, telecom, and small self-consumption solar installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for off-grid\/self-consumption solar systems (lighting, routers, cameras, small electronics, and efficient refrigerators), UPS\/EPS and emergency lighting, control and telemetry equipment, and solar\/wind micro-hybrids with low to medium demand. For higher power, it is recommended to expand the battery bank or upgrade to 24\/48 V.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 1.2 kWh (12 V × 100 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity by rate\u003c\/td\u003e\n\u003ctd\u003e100 Ah (C100) · 92.9 Ah (C10) · 82.5 Ah (C5) · 60.8 Ah (C1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLead Gel VRLA (gelled electrolyte), sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e307 × 168 × 211\/214 mm (L × W × H\/Total H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 28.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 5.2 mΩ (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 1200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharging voltages (25 °C)\u003c\/td\u003e\n\u003ctd\u003eCyclic 14.4–15.0 V · Float 13.5–13.8 V · Stand-by 13.8–14.1 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharging current\u003c\/td\u003e\n\u003ctd\u003eRecommended 10 A · Max. 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature ranges\u003c\/td\u003e\n\u003ctd\u003eDischarge −40~+60 °C · Charge −20~+50 °C · Storage −20~+50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configured in Gel\/VRLA profile and adjustable voltages. Suitable for AC-DC chargers with IUoU curve for Gel and temperature probe. Works with 12 V pure sine wave inverters: with one unit, comfortable use ~300–600 W continuous; for higher power, increase Ah in parallel (symmetrical wiring, star topology) or upgrade to 24\/48 V. Can be connected in series with identical 6GFM100G units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Gel Battery 12V 100Ah 6GFM100G\u003c\/strong\u003e is a professional solution for solar and backup projects that prioritize safety, reliability, and zero maintenance, optimizing the availability and efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755545429,"sku":"ELEKBAT003","price":174.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-GEL-100-2.png?v=1762625546"},{"product_id":"bateria-gel-eleksol-12v-250ah-6gfm250g","title":"Eleksol Gel Battery 12V 180Ah 6GFM180G","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Gel Battery 12V 180Ah 6GFM180G\u003c\/strong\u003e is a valve-regulated lead-acid (VRLA) monoblock battery with gelled electrolyte, sealed and maintenance-free. Designed for solar installations and critical backup, it combines thermal stability, low self-discharge, and a float design life of up to 12 years. Thanks to its Gel chemistry, it reduces stratification and maintains stable voltage during discharge, resulting in reliable autonomy for efficient electronics, telecommunications, and small 12 V inverters. Its compact format, M8 terminals, and ABS container allow for clean and safe integration in technical enclosures, off-grid homes, and hybrid solar\/wind systems.\u003c\/p\u003e\n\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed Gel VRLA technology: no water addition, minimal emissions, and safe indoor operation.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e180 Ah (C100)\u003c\/strong\u003e for solid autonomy in continuous loads.\u003c\/li\u003e\n  \u003cli\u003eIUoU charge profile specific for Gel; no equalization required.\u003c\/li\u003e\n  \u003cli\u003eLow self-discharge (~3 %\/month at 20–25 °C) and float life of up to 12 years.\u003c\/li\u003e\n  \u003cli\u003eM8 threaded terminals and high-strength ABS container; quick installation in standard trays.\u003c\/li\u003e\n  \u003cli\u003eMax. discharge current (5 s) ≈ 1500 A; internal resistance ≈ 3.9 mΩ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eZero maintenance: ideal for remote locations, reduces visits and costs.\u003c\/li\u003e\n  \u003cli\u003eGreater thermal and voltage stability than other sealed technologies under moderate discharges.\u003c\/li\u003e\n  \u003cli\u003e12 V monoblock format simplifies wiring, protections, and replacement.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V grid chargers.\u003c\/li\u003e\n  \u003cli\u003eSilent and clean operation, suitable for indoor and inhabited spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for off-grid\/self-consumption 12 V solar systems (lighting, routers, cameras, control\/telemetry), UPS\/EPS and emergency lighting, telecommunications, and monitoring stations. Also suitable as DC\/AC backup with 12 V inverters and in hybrid solar\/wind systems with moderate discharges. For high power demands or repeated peaks, it is advisable to increase the bank capacity or raise the system voltage to 24\/48 V to reduce currents and voltage drops.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e180 Ah (C100) · 150 Ah (C10) · 133 Ah (C5, at 10.5 V) · 109 Ah (C1, at 9.6 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 2.16 kWh (12 V × 180 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLead Gel VRLA (gelled electrolyte), sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge profile\u003c\/td\u003e\n\u003ctd\u003eIUoU for Gel (no equalization)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge voltages (25 °C)\u003c\/td\u003e\n\u003ctd\u003eCyclic 14.4–15.0 V · Float 13.5–13.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eThermal compensation\u003c\/td\u003e\n\u003ctd\u003e≈ −3 to −4 mV\/°C per cell\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRecom. 15–30 A · Max. 45 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 1500 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 3.9 mΩ (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 3 %\/month (20–25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature ranges\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~+55 °C · Charge 0~+40 °C · Storage −20~+55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e483 × 171 × 240 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 42 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContainer\u003c\/td\u003e\n\u003ctd\u003eHigh-strength ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configured for Gel\/VRLA profile and adjustable voltages. PWM is suitable with “12 V nominal” modules (36 cells); MPPT is preferable with 60\/120\/144 cell modules or strings with Vmp \u0026gt; 18 V. Works with 12 V AC-DC chargers that apply IUoU curve for Gel and, preferably, temperature probe. Suitable for 12 V pure sine wave inverters within the bank’s capacity: with one unit, comfortable operation ~600–900 W continuous; for higher power or demanding peaks, increase Ah in parallel (symmetrical wiring, star topology) or switch to 24\/48 V. Can be connected in series with identical 6GFM180G units for 24\/36\/48 V.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eEleksol Gel Battery 12V 180Ah 6GFM180G\u003c\/strong\u003e is a professional solution for solar and backup projects seeking safety, stability, and zero maintenance, maximizing the availability and efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755742037,"sku":"ELEKBAT004","price":232.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-GEL-180-2.png?v=1762625551"},{"product_id":"bateria-gel-eleksol-12v-300ah-6gfm300g","title":"Eleksol Gel Battery 12V 250Ah 6GFM250G","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Gel Battery 12V 250Ah 6GFM250G\u003c\/strong\u003e is a valve-regulated lead-acid (VRLA) monoblock battery with gelled electrolyte, sealed and maintenance-free. Designed for off-grid and self-consumption solar installations, UPS\/EPS, and telecommunications, it combines safety, thermal stability, and excellent performance under moderate discharge. Its Gel chemistry reduces stratification, improves temperature behavior, and offers a design life in float of up to 12 years, with low self-discharge. Thanks to its 12 V format, it integrates easily into existing systems, whether for direct DC consumption or through pure sine wave inverters.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed Gel VRLA technology: no water addition, minimal emissions, and safe indoor operation.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e250 Ah (C100)\u003c\/strong\u003e for solid autonomy in continuous consumption.\u003c\/li\u003e\n  \u003cli\u003eIUoU charging profile specific for Gel; does not require equalization.\u003c\/li\u003e\n  \u003cli\u003eM8 terminals and high-strength ABS container for firm and durable connections.\u003c\/li\u003e\n  \u003cli\u003eLow self-discharge (~3 %\/month at 20–25 °C) and float life of up to 12 years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eZero maintenance: reduces travel and operational costs in remote locations.\u003c\/li\u003e\n  \u003cli\u003eThermal and voltage stability: greater reliability against environmental variations.\u003c\/li\u003e\n  \u003cli\u003eClean and quick installation: monoblock format simplifies wiring and protections.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V grid chargers.\u003c\/li\u003e\n  \u003cli\u003eGood performance under moderate discharges, ideal for backup and 24\/7 services.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for off-grid and self-consumption solar systems at 12 V (lighting, efficient refrigerators, routers, cameras, and control electronics), UPS\/EPS and emergency lighting, telecommunications and telemetry stations, as well as hybrid solar\/wind systems with moderate discharges. It can operate as a single 12 V bank or form 24\/36\/48 V banks by series connection with identical units.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e250 Ah (C100) · 200 Ah (C10) · 172.5 Ah (C5) · 142 Ah (C1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 3.0 kWh (12 V × 250 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLead Gel VRLA (gelled electrolyte), sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eMonoblock, maintenance-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e522 × 170 × 216 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 58.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 3.7 mΩ (25 °C, full charge)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 3 %\/month (20–25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge current (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 1000 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFloat voltage (25 °C)\u003c\/td\u003e\n\u003ctd\u003e13.5–13.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCyclic voltage (25 °C)\u003c\/td\u003e\n\u003ctd\u003e14.4–15.0 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRecom. 20–40 A · Max. 60 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eThermal compensation\u003c\/td\u003e\n\u003ctd\u003e≈ −3 to −4 mV\/°C per cell\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature ranges\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~+55 °C · Charge 0~+40 °C · Storage −20~+55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDesign life\u003c\/td\u003e\n\u003ctd\u003eUp to 12 years in float (ideal conditions at 25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configured in Gel\/VRLA profile and adjustable voltages; MPPT recommended with 60\/120\/144 cell modules or strings with Vmp \u0026gt; 18 V. Works with 12 V AC-DC chargers that apply IUoU curve for Gel and, preferably, temperature probe. Suitable for 12 V pure sine wave inverters within the bank's capacity: with one unit, comfortable use ~700–1100 W continuous; for higher power or demanding peaks, increase Ah in parallel (symmetrical wiring, star topology) or raise the system voltage to 24\/48 V. Can be connected in series with identical 6GFM250G units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Gel Battery 12V 250Ah 6GFM250G\u003c\/strong\u003e is a professional solution for energy storage in solar and critical backup projects, maximizing availability, safety, and efficiency with zero maintenance and easy integration into any 12 V installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755905877,"sku":"ELEKBAT005","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-GEL-250-1.png?v=1762625555"},{"product_id":"bateria-litio-eleksol-12-8v-100ahbt-12-8v-100ah-bluetooth","title":"Eleksol Gel Battery 12V 300Ah 6GFM300G","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Gel Battery 12V 300Ah 6GFM300G\u003c\/strong\u003e is a valve-regulated lead-acid (VRLA) monoblock battery with gelled electrolyte, sealed and maintenance-free. Designed for solar applications, UPS\/EPS, and telecommunications, it offers high discharge stability, low self-discharge, and a design life in float of up to 12 years. Its Gel chemistry tolerates temperatures and moderate cyclic use better than other sealed technologies, ensuring service continuity and a clean, safe installation in 12 V systems with inverter or direct DC consumption.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed Gel VRLA technology: no water addition, minimal emissions, and safe operation.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e300 Ah (C100)\u003c\/strong\u003e for great autonomy in continuous loads.\u003c\/li\u003e\n  \u003cli\u003eLong float life (up to 12 years), self-discharge ≈ 3 %\/month at 20–25 °C.\u003c\/li\u003e\n  \u003cli\u003eM8 terminals and robust ABS container; easy integration in standard trays\/boxes.\u003c\/li\u003e\n  \u003cli\u003eIUoU charge profile specific for Gel; no equalization.\u003c\/li\u003e\n  \u003cli\u003eMax. discharge current (5 s) ≈ 1200 A; internal resistance ≈ 3.5 mΩ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple installation in monoblock format: less cabling and zero maintenance.\u003c\/li\u003e\n  \u003cli\u003eClean and safe operation, ideal for remote locations or indoor enclosures.\u003c\/li\u003e\n  \u003cli\u003eExcellent voltage stability in float and good thermal performance.\u003c\/li\u003e\n  \u003cli\u003eOptimized total cost of ownership in moderate cycle and backup uses.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V IUoU chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for off-grid solar installations and 12 V self-consumption (lighting, efficient refrigerators, control electronics), UPS\/EPS systems, telecommunications, monitoring stations, and emergency lighting. Also valid in wind-solar hybrids with moderate discharges and as DC\/AC backup via 12 V inverters. For high power demands or repeated peaks, it is recommended to increase the bank capacity or raise the system voltage to 24\/48 V.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e300 Ah (C100) · 250 Ah (C10) · 220.5 Ah (C5) · 148 Ah (C1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 3.6 kWh (12 V × 300 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLead Gel VRLA (gelled electrolyte), sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge profile\u003c\/td\u003e\n\u003ctd\u003eIUoU for Gel (no equalization)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge voltages (25 °C)\u003c\/td\u003e\n\u003ctd\u003eCyclic 14.4–15.0 V · Float 13.5–13.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eThermal compensation\u003c\/td\u003e\n\u003ctd\u003e≈ −3 to −4 mV\/°C per cell\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRec. 20–40 A · Max. 75 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. discharge (5 s)\u003c\/td\u003e\n\u003ctd\u003e≈ 1200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≈ 3.5 mΩ (25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 3 %\/month (20–25 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTemperature ranges\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~+55 °C · Charge 0~+40 °C · Storage −20~+55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e520 × 268 × 220\/225 mm (L × W × H\/Total H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 68.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContainer\u003c\/td\u003e\n\u003ctd\u003eHigh-resistance ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eWorks with 12 V solar controllers (PWM or MPPT) configured in Gel\/VRLA profile and adjustable voltages; MPPT recommended with 60\/120\/144 cell modules or strings with Vmp \u0026gt; 18 V. Compatible with 12 V AC-DC chargers applying IUoU curve for Gel and, preferably, temperature probe. Suitable for 12 V pure sine wave inverters within the bank's capacity: with one unit, comfortable operation up to ~800–1200 W continuous; for higher power or demanding peaks, increase Ah in parallel (symmetrical wiring, star topology) or switch to 24\/48 V. Can be connected in series with identical 6GFM300G units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Gel Battery 12V 300Ah 6GFM300G\u003c\/strong\u003e is a professional solution for storage in renewable energy and critical backup projects, combining safety, long life, and zero maintenance to maximize the availability and efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502755938645,"sku":"ELEKBAT006","price":354.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-GEL-300-1.png?v=1762625557"},{"product_id":"bateria-litio-eleksol-12-8v-150ah-lfp150ah","title":"Eleksol Lithium Battery 12.8V 100Ah LFP100AHBT Bluetooth","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 100Ah LFP100AHBT Bluetooth\u003c\/strong\u003e is a high-performance lithium iron phosphate (LiFePO₄) accumulator designed as a direct replacement for 12 V lead-acid batteries. It integrates a protective BMS and \u003cem\u003eBluetooth\u003c\/em\u003e for monitoring via app (voltage, current, SOC, temperature, and events), offering safety, light weight, and a lifespan exceeding 3,500 cycles at 80% DoD. Its IP65 protection rating, ABS enclosure, and prismatic LFP cells ensure reliability in demanding environments, from off-grid solar systems to marine, caravans, or telecommunications.\u003c\/p\u003e\n\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe, stable, and maintenance-free LiFePO₄ (LFP) chemistry; BMS with comprehensive protections.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100 Ah capacity\u003c\/strong\u003e at 12.8 V (≈ 1.28 kWh) with high charge\/discharge efficiency.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e 4.0 connectivity for bank diagnostics and control.\u003c\/li\u003e\n  \u003cli\u003eMore than 3,500 cycles @80% DoD (35 °C) and flat voltage curve for better energy utilization.\u003c\/li\u003e\n  \u003cli\u003eIP65: resistant to dust and water jets (not submersible); weight approx. 11 kg.\u003c\/li\u003e\n  \u003cli\u003e“Drop-in” 12 V format: replaces VRLA\/AGM\/Gel without complex modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 50–70% less weight than lead-acid, better Wh\/kg ratio, and peak response.\u003c\/li\u003e\n  \u003cli\u003eLonger lifespan and reduced total cost of ownership compared to AGM\/Gel.\u003c\/li\u003e\n  \u003cli\u003eFast recharge with CC-CV chargers; minimal self-discharge and high efficiency (\u0026gt;95%).\u003c\/li\u003e\n  \u003cli\u003eIntelligent management: the BMS protects against overcharge, overdischarge, short circuit, and temperature.\u003c\/li\u003e\n  \u003cli\u003eReal-time visibility with the app: health status, alarms, and cell balancing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for residential and mobile 12 V solar installations (camper, marine, off-grid), UPS, telecommunications, control and automation, emergency lighting, and small light electric vehicles. Also suitable for hybrid solar\/alternator systems with DC-DC, where fast recharge and voltage stability under load are valued.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower\/Energy\u003c\/td\u003e\n\u003ctd\u003e≈ 1.28 kWh (12.8 V × 100 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ (LFP) with BMS and Bluetooth 4.0\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRecom. 50 A · Max. 100 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge voltage\u003c\/td\u003e\n\u003ctd\u003e14.2 V (CC-CV); gentle float 13.5–13.6 V (optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContinuous discharge\u003c\/td\u003e\n\u003ctd\u003e≈ 100 A (BMS cut-off ≈ 10.0 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLife cycles\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 3,500 @ 80% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 11 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e306 × 168 × 211.5 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eThermal range\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~60 °C · Charge 0~45 °C · Storage 0~40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCase material\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V PWM\/MPPT solar controllers that have a LiFePO₄ profile or adjustable voltages (14.2 V). Works with AC-DC chargers for lithium (CC-CV) and with alternators via a \u003cem\u003eDC-DC\u003c\/em\u003e charger to limit voltage\/current. Can be used in parallel with identical \u003cem\u003eLFP100AHBT\u003c\/em\u003e units (same cables and fuse per battery). Series use is only recommended if the batch BMS authorizes it; if in doubt, operate at 12 V or in parallel.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 100Ah LFP100AHBT Bluetooth\u003c\/strong\u003e is a professional solution for renewable storage that provides safety, light weight, and advanced control, maximizing the autonomy and efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502756102485,"sku":"ELEKBAT007","price":304.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-100-2.png?v=1762625558"},{"product_id":"bateria-litio-eleksol-12-8v-200ahbt-12-8v-200ah-bluetooth","title":"Eleksol Lithium Battery 12.8V 150Ah LFP150AH","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 150Ah LFP150AH\u003c\/strong\u003e is a high-performance LiFePO₄ (LFP) accumulator in a 12 V “drop-in” format, designed to replace AGM\/GEL\/VRLA lead-acid batteries without complications. It incorporates a protective BMS and high-quality prismatic cells to provide electrical safety, long service life (\u0026gt;3,000 cycles at 80% DoD), and stable energy delivery. With M8 terminals, a robust ABS case, and a contained weight (~20 kg), this solution is ideal for solar installations, UPS\/EPS, marine, caravans, and telecommunications, where reliability, lightness, and fast recharging are valued.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe, stable, and maintenance-free LiFePO₄ (LFP) chemistry, with integrated BMS (protection for voltage, current, and temperature).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e150 Ah at 12.8 V (≈ 1,920 Wh)\u003c\/strong\u003e, high coulombic efficiency, and flat voltage curve for better energy utilization.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 12 V lead-acid; compatible in series up to 4 units (≈ 51.2 V) and in parallel up to 2 identical units.\u003c\/li\u003e\n  \u003cli\u003eFast recharge with CC-CV profile; recommended voltage 14.6 V per 12.8 V battery.\u003c\/li\u003e\n  \u003cli\u003eDischarge peak 300 A\/10 s and continuous discharge 150 A (≈ 1.9 kW DC per unit, before losses).\u003c\/li\u003e\n  \u003cli\u003eDimensions 483×170×241\/246 mm, weight ≈ 20 kg, M8 terminals, and durable ABS container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 50–70% less weight than AGM\/GEL and greater usable energy per cycle: more autonomy in the same space.\u003c\/li\u003e\n  \u003cli\u003eLong service life: \u0026gt;3,000 cycles at 80% DoD → lower total cost of ownership compared to lead-acid.\u003c\/li\u003e\n  \u003cli\u003eFast recharge and minimal self-discharge: ready for intensive, mobile, or short charging window uses.\u003c\/li\u003e\n  \u003cli\u003eActive safety: the BMS protects against overcharge, overdischarge, short circuit, and extreme temperatures.\u003c\/li\u003e\n  \u003cli\u003eClean “plug \u0026amp; play” installation at 12 V, with less wiring and no periodic maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eEspecially suitable for off-grid and self-consumption solar systems at 12\/24\/36\/48 V (depending on series), UPS\/EPS, telecommunications, control and automation, emergency lighting, marine, and caravans\/motorhomes. Also suitable for light mobility and applications with moderate\/high continuous power demands. In vehicles with alternators, it is recommended to interpose a DC-DC charger for proper voltage and current control.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e150 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEnergy\u003c\/td\u003e\n\u003ctd\u003e≈ 1,920 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ (LFP) with BMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge voltage (CV)\u003c\/td\u003e\n\u003ctd\u003e14.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRecommended 75 A · Max. 150 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContinuous discharge\u003c\/td\u003e\n\u003ctd\u003e150 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDischarge peak\u003c\/td\u003e\n\u003ctd\u003e300 A \/ 10 s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEnd of discharge (BMS)\u003c\/td\u003e\n\u003ctd\u003e11.2 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLife cycles\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 3,000 @ 80% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003eDischarge −20 ~ 55 °C · Charge 0 ~ 50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSeries \/ Parallel\u003c\/td\u003e\n\u003ctd\u003eSeries up to 4 · Parallel up to 2 (identical units)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e483 × 170 × 241\/246 mm (L × W × H\/Total H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContainer material\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with PWM\/MPPT solar charge controllers offering LiFePO₄ profile or adjustable voltages; with AC chargers for lithium (CC-CV 14.6 V) and with alternators via DC-DC charger. Works with 12 V pure sine wave inverters sized to the bank capacity: up to ~1.5–1.7 kW AC per battery (depending on efficiency and peaks). Suitable for series banks (24\/36\/48 V) with 4 identical units and for parallel expansion with 2 identical units (pre-equalize voltages, symmetrical wiring, and fuse per battery).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 150Ah LFP150AH\u003c\/strong\u003e is a professional storage solution for renewable energy and critical backup, providing maximum safety, lightness, and control, optimizing the autonomy and efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502756200789,"sku":"ELEKBAT008","price":419.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-150-3.png?v=1762625563"},{"product_id":"bateria-litio-eleksol-12-8v-200ah-lfp200ahba-asiento","title":"Eleksol Lithium Battery 12.8V 200Ah LFP200AHBT Bluetooth","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 200Ah LFP200AHBT Bluetooth\u003c\/strong\u003e is a 12.8 V “drop-in” LiFePO₄ battery that directly replaces AGM\/GEL\/VRLA, providing lightness, safety, and real-time control via its Bluetooth app. With integrated BMS, IP65 rating, and high-performance prismatic cells, it offers more than 3,000 cycles at high depths of discharge, a flat voltage curve, and fast recharging with a CC-CV profile, making it an ideal solution for solar energy, marine, caravanning, UPS, and telecommunications.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe and stable LiFePO₄ (LFP) chemistry, maintenance-free, with BMS that protects against overcharge, overdischarge, short circuit, and temperature.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e connectivity to monitor voltage, current, SOC, temperature, and system events from your mobile device.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e200 Ah\u003c\/strong\u003e at 12.8 V (≈ 2,560 Wh) with high charge\/discharge efficiency and low self-discharge.\u003c\/li\u003e\n  \u003cli\u003eABS enclosure with \u003cstrong\u003eIP65\u003c\/strong\u003e protection: resistant to dust and water jets (not submersible).\u003c\/li\u003e\n  \u003cli\u003e“Drop-in” format: same footprint as a 12 V lead-acid battery for quick replacements.\u003c\/li\u003e\n  \u003cli\u003eSeries connection up to 4 units (≈ 51.2 V) and parallel connection between identical units, following good balancing practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMore usable energy per cycle than lead-acid and greatly reduced weight: improves autonomy and overall system performance.\u003c\/li\u003e\n  \u003cli\u003eOptimized total cost of ownership thanks to its superior lifespan and efficiency (\u0026gt;95% typical).\u003c\/li\u003e\n  \u003cli\u003eFast recharging with LiFePO₄ CC-CV chargers and intelligent BMS management to extend cell life.\u003c\/li\u003e\n  \u003cli\u003eClean and safe installation in off-grid homes, technical cabins, boats, or recreational vehicles.\u003c\/li\u003e\n  \u003cli\u003eApp-based monitoring that simplifies diagnostics and preventive maintenance of the battery bank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for 12 V off-grid solar systems (self-consumption, camper, marine, and telecom), UPS\/EPS, control and automation, golf carts and buggies, as well as cyclic applications with frequent charge\/discharge cycles. Also suitable for PV + alternator hybrids via DC-DC chargers, where fast recharging and voltage stability are valued.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 2,560 Wh (12.8 V × 200 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e200 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ (LFP) with BMS and Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge voltage (CV\/absorption)\u003c\/td\u003e\n\u003ctd\u003e14.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFloat (optional)\u003c\/td\u003e\n\u003ctd\u003e13.5–13.6 V gentle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended \/ max. charge\u003c\/td\u003e\n\u003ctd\u003e40 A \/ 100 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended \/ max. continuous discharge\u003c\/td\u003e\n\u003ctd\u003e100 A \/ 200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. pulse (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 600 A (ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLow voltage cut-off (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 10.0 V (reconnection \u0026gt; 11.2 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e522 × 240 × 218 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 20.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eM8 (tightening torque 9–11 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContainer material\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperatures\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~60 °C · Charge 0~45 °C · Storage −5~35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar charge controllers (PWM\/MPPT) with LiFePO₄ profile or adjustable voltages; AC chargers for lithium with CC-CV curve (14.6 V) and alternators via DC-DC chargers. Works with 12 V inverters sized to the bank capacity (≈ 1.2 kW continuous per battery; up to ≈ 2.5 kW DC at maximum continuous). Suitable for parallel installation between identical LFP200AHBT units (symmetrical wiring and fuse per battery) and in series up to 4 units for 24\/36\/48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 200Ah LFP200AHBT Bluetooth\u003c\/strong\u003e is a professional solution for renewable storage that maximizes autonomy, safety, and efficiency with zero maintenance and advanced control from your smartphone.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502756331861,"sku":"ELEKBAT009","price":535.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-200-2.png?v=1762625565"},{"product_id":"bateria-litio-eleksol-12-8v-300ah-lfp300btba-asiento","title":"Eleksol Lithium Battery 12.8V 200Ah LFP200BTBA Under Seat","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 200Ah LFP200BTBA Underseat\u003c\/strong\u003e is a low-profile “drop-in” LiFePO₄ battery designed for installation under seats or in narrow compartments of campers, marine vessels, and 12 V solar systems. It integrates a BMS with full protections and \u003cem\u003eBluetooth\u003c\/em\u003e for app-based monitoring (voltage, current, SOC, temperature, and events). Its compact metal enclosure with IP65 rating, prismatic LFP cells, and high charge\/discharge efficiency provide safety, real autonomy, and long service life with zero maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe and stable LiFePO₄ (LFP) chemistry, with BMS that protects against overcharge, overdischarge, overcurrent, short circuit, and temperature.\u003c\/li\u003e\n  \u003cli\u003eUnderseat format: 357 × 338 × 152 mm, robust metal case, and approximate weight of 23.4 kg.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e200 Ah capacity\u003c\/strong\u003e at 12.8 V (≈ 2,560 Wh) with flat voltage curve and high efficiency (\u0026gt;95% typical).\u003c\/li\u003e\n  \u003cli\u003eBluetooth connectivity for real-time bank diagnostics and control.\u003c\/li\u003e\n  \u003cli\u003eIP65 protection rating: resistant to dust and water jets (not submersible).\u003c\/li\u003e\n  \u003cli\u003eSeries connection up to 4 units (≈ 51.2 V) and parallel connection between identical units, following good balancing practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMore usable energy than lead-acid at equal Ah and contained weight: improves autonomy without penalizing space.\u003c\/li\u003e\n  \u003cli\u003eZero maintenance, lower total cost of ownership, and fast recharge with CC-CV profile.\u003c\/li\u003e\n  \u003cli\u003eIntelligent management: the BMS extends cell life and prevents trips due to peaks or extreme temperatures.\u003c\/li\u003e\n  \u003cli\u003eClean “plug \u0026amp; play” installation at 12 V and easy underseat placement thanks to its low profile.\u003c\/li\u003e\n  \u003cli\u003eApp-based monitoring simplifies diagnostics, bank balancing, and imbalance detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for camper\/caravan (underseat installation), boats, golf carts and buggies, 12 V solar storage, telecommunications, control\/automation, and UPS\/EPS. Also suitable for hybrid PV + alternator systems (with DC-DC charger) and cyclic applications with frequent charge\/discharge where safety, voltage stability, and rapid recharge are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e200 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEnergy\u003c\/td\u003e\n\u003ctd\u003e≈ 2,560 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ (LFP) with BMS and Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge (CV\/absorption)\u003c\/td\u003e\n\u003ctd\u003e14.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFloat\u003c\/td\u003e\n\u003ctd\u003eOptional, 13.5–13.6 V (gentle)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended \/ max. charge\u003c\/td\u003e\n\u003ctd\u003e40 A \/ 100 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended \/ max. continuous discharge\u003c\/td\u003e\n\u003ctd\u003e100 A \/ 200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. pulse (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 600 A (5–15 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLow voltage cut-off (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 10.0 V (reconnection \u0026gt; 11.2 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e357 × 338 × 152 mm (low profile)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 23.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8 (tightening torque 9–11 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperatures\u003c\/td\u003e\n\u003ctd\u003eDischarge −20~60 °C · Charge 0~45 °C · Storage −5~35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSeries \/ Parallel\u003c\/td\u003e\n\u003ctd\u003eSeries up to 4 · Parallel between identical LFP200BTBA units\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCase material\u003c\/td\u003e\n\u003ctd\u003eMetal (underseat) with coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar charge controllers (PWM\/MPPT) that have a LiFePO₄ profile or adjustable voltages (14.6 V). Works with AC chargers for lithium with CC-CV curve and with alternators via DC-DC chargers. Suitable for 12 V pure sine wave inverters: comfortable operation ≈ 1.2 kW continuous per battery (up to ≈ 2.5 kW DC continuous max. under favorable conditions). In parallel, use identical units, pre-match voltages, and install an individual fuse per battery with symmetrical wiring and star distribution bars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 200Ah LFP200BTBA Underseat\u003c\/strong\u003e is a professional and compact solution for renewable energy and mobility projects, maximizing autonomy, safety, and efficiency with simple underseat integration.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502756397397,"sku":"ELEKBAT010","price":568.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-200-B-1.png?v=1762625569"},{"product_id":"bateria-litio-eleksol-12-8v-300ah-lfp300btba-bajo-asiento","title":"Eleksol Lithium Battery 12.8V 300Ah LFP300BTBA Under Seat","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 300Ah LFP300BTBA Underseat\u003c\/strong\u003e is a 12.8 V “drop-in” LiFePO₄ battery with a low-profile metal case designed for underseat installations or narrow compartments. It features a BMS with full protections and Bluetooth connectivity to monitor voltage, current, SOC, temperature, and events from your mobile device. Its LFP chemistry ensures high safety, excellent voltage stability, and great charge\/discharge efficiency, making it an ideal solution for 12 V solar energy, camper vans, marine applications, golf carts, telecommunications, and UPS\/EPS systems.\u003c\/p\u003e\n\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe, maintenance-free LiFePO₄ chemistry with BMS that protects against overcharge, overdischarge, overcurrent, short circuit, and temperature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e300 Ah\u003c\/strong\u003e at 12.8 V (≈ 3,840 Wh) with a flat voltage curve and high efficiency (\u0026gt;95%).\u003c\/li\u003e\n  \u003cli\u003eUnderseat format: 390 × 360 × 160 mm; approx. weight 33 kg; M8 terminals.\u003c\/li\u003e\n  \u003cli\u003eIntegrated Bluetooth for real-time bank diagnostics.\u003c\/li\u003e\n  \u003cli\u003eIP65 protection rating: resistant to dust and water jets (not submersible).\u003c\/li\u003e\n  \u003cli\u003eCompatible in series up to 4 units (≈ 51.2 V) and in parallel with identical units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMore usable energy and lower weight than lead-acid at the same Ah: greater autonomy and better Wh\/kg ratio.\u003c\/li\u003e\n  \u003cli\u003eOptimized total cost of ownership due to long service life and minimal self-discharge.\u003c\/li\u003e\n  \u003cli\u003eFast recharge with CC-CV profile and excellent thermal performance.\u003c\/li\u003e\n  \u003cli\u003eClean “plug \u0026amp; play” installation at 12 V; its low profile makes use of previously unusable spaces.\u003c\/li\u003e\n  \u003cli\u003eApp-based monitoring simplifies preventive maintenance and imbalance detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for caravans and camper vans (underseat installation), boats, buggies and golf carts, as well as for 12 V solar storage, telecommunications, control and automation, and UPS\/EPS systems. In hybrid systems (PV + alternator), its high efficiency and fast recharge capability allow for frequent cycles with great reliability.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e300 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e3,840 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ with BMS and Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e390 × 360 × 160 mm (low profile)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 33 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8 (torque 9–11 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge (CV\/absorption)\u003c\/td\u003e\n\u003ctd\u003e14.6 V · optional float \u0026lt; 13.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended\/max. charge\u003c\/td\u003e\n\u003ctd\u003e60 A \/ 150 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRecommended\/max. continuous discharge\u003c\/td\u003e\n\u003ctd\u003e60 A \/ 200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. pulse (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 600 A (5–15 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLow voltage cut-off (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 10.0 V (reconnection \u0026gt; 11.2 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 3 %\/month\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperatures\u003c\/td\u003e\n\u003ctd\u003eDischarge −20 ~ 60 °C · Charge 0 ~ 45 °C · Storage −5 ~ 35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSeries \/ Parallel\u003c\/td\u003e\n\u003ctd\u003eSeries up to 4 · Parallel between identical LFP300BTBA units\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCase material\u003c\/td\u003e\n\u003ctd\u003eHigh-strength metal (underseat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eWorks with 12 V solar charge controllers (PWM\/MPPT) that have a LiFePO₄ profile or adjustable voltages (14.6 V). Compatible with AC chargers specifically for lithium with CC-CV curve and with alternators via DC-DC chargers to limit voltage and current. Suitable for 12 V pure sine wave inverters: comfortable use ≈ 0.76 kW DC per battery recommended continuous; up to ≈ 2.56 kW DC maximum continuous under favorable conditions. In parallel, use identical units, precharge to the same voltage, use individual fuses, and symmetrical wiring with star busbars.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 300Ah LFP300BTBA Underseat\u003c\/strong\u003e is a professional and compact solution for renewable energy and mobility projects, maximizing autonomy, safety, and efficiency with simple underseat integration.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502757609813,"sku":"ELEKBAT011","price":816.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-300-B-1.png?v=1762625576"},{"product_id":"bateria-litio-eleksol-12-8v-400ah-lfp400ahbt-bluetooth","title":"Eleksol Lithium Battery 12.8V 400Ah LFP400AHBT Bluetooth","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol Lithium Battery 12.8V 400Ah LFP400AHBT Bluetooth\u003c\/strong\u003e is a high-capacity LiFePO₄ (lithium iron phosphate) accumulator designed as a “drop-in” replacement for 12 V lead-acid batteries. It incorporates a BMS with full protections and Bluetooth connectivity to view the state of charge (SOC), voltage, current, temperature, and events from the app. With 5,120 Wh of nominal energy, an ABS enclosure with IP65 protection, and low self-discharge, it offers safety, fast recharging, and a lifespan exceeding 3,000 cycles, making it ideal for solar energy, marine, caravanning, telecommunications, and industrial applications.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe, stable, and maintenance-free LiFePO₄ (LFP) chemistry, with BMS that protects against overcharge, overdischarge, overcurrent, short circuit, and temperature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e400 Ah at 12.8 V (≈ 5,120 Wh)\u003c\/strong\u003e with a flat voltage curve and high efficiency (\u0026gt;95% typical).\u003c\/li\u003e\n  \u003cli\u003eIntegrated Bluetooth for real-time monitoring and bank diagnostics.\u003c\/li\u003e\n  \u003cli\u003eIP65 protection rating: resistant to dust and water jets (not submersible); self-discharge \u0026lt; 3%\/month.\u003c\/li\u003e\n  \u003cli\u003e12 V “drop-in” format with M8 terminals and robust ABS enclosure (≈ 38 kg).\u003c\/li\u003e\n  \u003cli\u003eSeries connection up to 4 units (≈ 51.2 V) and parallel connection between identical units following best practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMore usable energy and much less weight than AGM\/Gel at the same Ah: greater autonomy and better Wh\/kg ratio.\u003c\/li\u003e\n  \u003cli\u003eOptimized total cost of ownership thanks to \u0026gt;3,000 cycles @80% DoD and its high coulombic efficiency.\u003c\/li\u003e\n  \u003cli\u003eFast recharge with CC-CV profile, ideal for short charging windows in marine, camper, or hybrid PV+alternator applications.\u003c\/li\u003e\n  \u003cli\u003eClean operation: zero maintenance, minimal self-discharge, and superior thermal stability.\u003c\/li\u003e\n  \u003cli\u003eControl and prevention: the Bluetooth app facilitates preventive maintenance and imbalance detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for 12 V solar storage (off-grid homes, technical cabins), boats and caravans\/campers, UPS\/EPS, golf carts\/buggies, telecommunications, and control\/automation systems. Also suitable for cyclic applications with frequent charge and discharge where safety, continuous power, and rapid charge replenishment are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12.8 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e400 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e5,120 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLiFePO₄ (LFP) with BMS and Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal resistance\u003c\/td\u003e\n\u003ctd\u003e≤ 20 mΩ (@50% SOC)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSelf-discharge\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 3%\/month\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge (CV\/absorption)\u003c\/td\u003e\n\u003ctd\u003e14.6 V · optional float \u0026lt; 13.6 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge current\u003c\/td\u003e\n\u003ctd\u003eRec. 80 A · Max. 200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContinuous discharge\u003c\/td\u003e\n\u003ctd\u003eRec. 100 A · Max. 250 A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDischarge peak (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 600 A (5–15 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLow voltage cut-off (BMS)\u003c\/td\u003e\n\u003ctd\u003e≈ 10.0 V (reconnection \u0026gt; 11.2 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e522 × 240 × 218 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8 (tightening torque 9–11 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eContainer material\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperatures\u003c\/td\u003e\n\u003ctd\u003eDischarge −20 ~ 60 °C · Charge 0 ~ 45 °C · Storage −5 ~ 35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLife cycles\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 3,000 @ 80% DoD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar charge controllers (PWM\/MPPT) that have a LiFePO₄ profile or adjustable voltages (CV 14.6 V). Works with dedicated AC chargers for lithium (CC-CV) and with alternators via DC-DC chargers to limit voltage and current. Suitable for 12 V pure sine wave inverters according to the bank’s capacity: comfortable operation ≈ 1.28 kW DC per battery (up to ≈ 3.2 kW DC at maximum continuous under favorable conditions). Can be connected in series up to 4 units for 24\/36\/48 V and in parallel between identical \u003cem\u003eLFP400AHBT\u003c\/em\u003e units (pre-match voltage, symmetrical wiring, and fuse per battery).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol Lithium Battery 12.8V 400Ah LFP400AHBT Bluetooth\u003c\/strong\u003e is a professional solution for demanding renewable energy projects: it increases autonomy, reduces maintenance, and improves the overall efficiency of your installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502757708117,"sku":"ELEKBAT012","price":897.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-LITIO-400.png?v=1762625582"},{"product_id":"bateria-solar-eleksol-es115-12v-115ah-sellada","title":"Eleksol Solar Battery 12V 115Ah ES115 Sealed","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol 12V 115Ah ES115 Sealed Solar Battery\u003c\/strong\u003e is a VRLA lead-acid monoblock (sealed with valve) designed to provide reliability in off-grid solar systems, pumping, and automation with moderate cycles. Being maintenance-free and featuring low self-discharge, it simplifies installation and daily use, offering safety, good float performance, and compatibility with 12 V PWM\/MPPT controllers.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTechnology: sealed VRLA lead-acid (valve regulated), maintenance-free and no refilling required.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage: 12 V with a capacity of \u003cstrong\u003e115 Ah (C100)\u003c\/strong\u003e for reliable autonomy.\u003c\/li\u003e\n  \u003cli\u003eM8 terminals and robust ABS casing for secure connections and long mechanical life.\u003c\/li\u003e\n  \u003cli\u003eIUoU charging profile (Bulk\/Absorption\/Float); no equalization required.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions: 353×175×190 mm (L×W×H) and approximate weight 24 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy installation: monoblock format reduces space and cabling.\u003c\/li\u003e\n  \u003cli\u003eCost-effective for occasional or moderate consumption applications.\u003c\/li\u003e\n  \u003cli\u003eSafety and cleanliness: sealed design minimizes emissions and spills.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with 12 V solar controllers and grid chargers.\u003c\/li\u003e\n  \u003cli\u003eZero maintenance: ideal for remote or hard-to-access locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for small residential or field solar installations (lighting, routers, cameras, automation), pumping stations with moderate consumption, light telecommunications, hybrid wind-solar systems, and basic backup for 12 V inverters. For intensive daily deep cycle service, it is advisable to consider specific deep cycle batteries.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e115 Ah (C100)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eSealed VRLA lead-acid (Valve Regulated)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eSealed monoblock, maintenance-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e353×175×190 mm (L×W×H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 24 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharging profile\u003c\/td\u003e\n\u003ctd\u003eIUoU (Absorption\/Float), no equalization\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with 12 V solar controllers (PWM or MPPT) configurable in VRLA\/AGM profile, AC-DC chargers with IUoU curve, and 12 V \u003cem\u003einverters\u003c\/em\u003e within the permissible power of the bank. It can be connected in series with identical units for 24\/36\/48 V, or in parallel (symmetrical wiring) to increase capacity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol 12V 115Ah ES115 Sealed Solar Battery\u003c\/strong\u003e is a practical and safe solution for those seeking reliable storage in occasional-use solar applications, optimizing costs and maintenance without sacrificing a clean and efficient installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502757773653,"sku":"ELEKBAT013","price":133.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-PLOMO-115-2.png?v=1762625583"},{"product_id":"bateria-solar-eleksol-es260-12v-260ah-sellada","title":"Eleksol Solar Battery 12V 260Ah ES260 Sealed","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEleksol 12V 260Ah ES260 Sealed Solar Battery\u003c\/strong\u003e is a valve-regulated lead-acid (VRLA) monoblock designed for off-grid solar installations, pumping, and auxiliary power where safety, low maintenance, and good float performance are required. Its sealed construction eliminates the need for water refills and minimizes emissions, while its high usable capacity at low discharge rates provides stable autonomy for continuous loads and moderate peaks with 12 V inverters.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed VRLA technology (Valve Regulated), maintenance-free and no equalization required.\u003c\/li\u003e\n  \u003cli\u003eNominal voltage 12 V and \u003cstrong\u003e260 Ah (C100)\u003c\/strong\u003e for high autonomy in moderate uses.\u003c\/li\u003e\n  \u003cli\u003eM8 threaded terminals and ABS container for secure connections and mechanical resistance.\u003c\/li\u003e\n  \u003cli\u003eIUoU charging profile (Bulk \/ Absorption \/ Float) with low self-discharge.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions 518×276×242 mm and approximate weight 59.8 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple installation in monoblock format: less wiring, lower complexity.\u003c\/li\u003e\n  \u003cli\u003eCost-effective for occasional cycle or moderate consumption applications.\u003c\/li\u003e\n  \u003cli\u003eSafe and clean: sealed design reduces the risk of spills and gases.\u003c\/li\u003e\n  \u003cli\u003eWide compatibility with PWM\/MPPT controllers and 12 V grid chargers.\u003c\/li\u003e\n  \u003cli\u003eGenerous autonomy for lighting, control equipment, light pumping, and backup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for residential and rural solar systems with moderate consumption (lighting, efficient refrigerators, routers, cameras, automation), light pumping and irrigation stations, telecommunications, and DC\/AC backup with 12 V inverters. Also valid for small\/medium-scale wind-solar hybrids. For intensive daily deep cycle use, it is recommended to consider batteries specifically designed for deep cycle.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e≈ 3.12 kWh (12 V × 260 Ah)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e260 Ah (C100)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eSealed lead VRLA (valve-regulated ventilation)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eSealed monoblock, maintenance-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e518 × 276 × 242 mm (L × W × H)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈ 59.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCharge profile\u003c\/td\u003e\n\u003ctd\u003eIUoU (Absorption\/Float); without equalization\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative voltages\u003c\/td\u003e\n\u003ctd\u003eAbsorption 14.2–14.6 V · Float 13.5–13.8 V at 25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eOperation with 12 V solar charge controllers (PWM or MPPT) configured for VRLA\/AGM profile and with AC-DC chargers applying the IUoU curve. Suitable for pure 12 V inverters; with one unit, up to ~600–1000 W continuous is recommended, and for higher power or demanding peaks, increase capacity in parallel or raise the system voltage (24\/48 V). Can be connected in series with identical units for 24\/36\/48 V and in parallel to increase Ah, always with symmetrical wiring, properly rated DC protections (ANL\/MEGA or DC circuit breaker), and a battery monitor to control SOC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEleksol 12V 260Ah ES260 Sealed Solar Battery\u003c\/strong\u003e is a robust and practical solution for storage in occasional-use solar projects, optimizing costs and maintenance without sacrificing autonomy, reliability, and a clean, safe installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502757904725,"sku":"ELEKBAT014","price":226.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-PLOMO-260-2.png?v=1762625586"},{"product_id":"estructura-aluminio-coplanar-chapa-1-panel","title":"Coplanar Aluminum Structure Sheet 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet 1 Panel\u003c\/strong\u003e is a flush mounting system for metal roofs (corrugated\/trapezoidal sheet or sandwich panel) that uses angles on the corrugation and a coplanar rail to securely anchor the module. Manufactured from structural aluminum with stainless steel fasteners, it offers quick installation, watertightness via EPDM, and high resistance to wind and snow.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with \u003cstrong\u003eHEX AN16 self-drilling bimetallic screws\u003c\/strong\u003e and EPDM insert.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eMaterials: EN AW-6082 aluminum and A2\/A4 stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the module remains coplanar with the sheet.\u003c\/li\u003e\n  \u003cli\u003eFast and secure installation with reliable sealing at each fixing point.\u003c\/li\u003e\n  \u003cli\u003eHigh rigidity and durability in demanding outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: annual retightening and inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026amp;I buildings with metal roofs where direct, watertight, and long-lasting anchoring is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on metal sheet with angle on corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSheet fixing\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws + EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and mid clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and EPDM tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet 1 Panel\u003c\/strong\u003e is a professional solution that maximizes safety, watertightness, and aesthetics on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758199637,"sku":"ELEKEST001","price":59.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1.png?v=1762625588"},{"product_id":"estructura-aluminio-coplanar-chapa-1-panel-microrail","title":"Coplanar Aluminum Structure Sheet 1 Panel with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminium Structure Sheet 1 Panel with Microrail\u003c\/strong\u003e is a coplanar 'rail-less' system designed to install a photovoltaic module on corrugated metal roofs or sandwich panels quickly, safely, and watertight. By dispensing with the continuous rail, the microrail reduces weight, parts, and assembly time, while maintaining the necessary rigidity thanks to direct fixing on the crest with HEX AN16 self-drilling screws and EPDM washer. It is a professional solution for industrial, agricultural, and commercial buildings that require structural reliability and minimal intrusion into the sheet.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar system with 'rail-less' microrail: lower weight and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eDirect fixing to the crest of the corrugation with HEX AN16 screws + EPDM.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with 30–35 mm module frames using end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminium and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster installation by eliminating the continuous rail and reducing drillings.\u003c\/li\u003e\n  \u003cli\u003eAesthetic integration: the module remains flush with the metal roof.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM washers on each fixing.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: annual retightening and visual inspection of seals.\u003c\/li\u003e\n  \u003cli\u003eLower logistical cost: fewer profiles, fewer cuts, and better use of transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal roofs of industrial, agricultural, and C\u0026I buildings with a slope ≤ 30°. Recommended for projects where installation time and control of roof penetrations are critical, without compromising durability or structural safety.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet\u003c\/td\u003e\n\u003ctd\u003eOn ridge with self-drilling HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape orientation recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per module\u003c\/td\u003e\n\u003ctd\u003e4 (min.): 2 per long edge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel fasteners A2\/A4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTorque values\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind ≤ 150 km\/h; snow ≤ 40 kg\/m² (dimension anchors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, grounding clips per module, cable glands, and UV-resistant ties. Always use EPDM tape\/rings under each fixing to the sheet and verify equipotential continuity of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 1 Panel with Microrail\u003c\/strong\u003e is the ideal option for a clean, watertight, and durable installation, maximizing installation time efficiency and the aesthetics of the metal roof.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758363477,"sku":"ELEKEST033","price":33.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1.png?v=1762625592"},{"product_id":"estructura-aluminio-coplanar-chapa-10-paneles","title":"Coplanar Aluminum Structure Sheet 10 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels\u003c\/strong\u003e is designed for long rows of ten modules on metal roofs. It is fixed on the ridge with HEX AN16 self-drilling screws and EPDM washer, and uses 47×37 mm rails joined with multiple connectors to ensure continuity, expansion control, and cable routing. The result is a robust, watertight installation that is visually integrated, with the modules flush with the sheet metal.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; perimeter reinforcement.\u003c\/li\u003e\n  \u003cli\u003eRails with multiple connectors for long sections.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; load calculation according to site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environmental conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with large sheet metal or sandwich panel surfaces that require structural reliability, watertightness, and quick installation.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 18 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edges\/attic; consider dividing into 5+5 for logistics and load management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels\u003c\/strong\u003e ensures a clean and professional installation, maximizing safety, watertightness, and durability for large-format photovoltaic systems.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758396245,"sku":"ELEKEST010","price":243.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_845e70b1-0911-4a9f-9307-9c31ae53dbda.png?v=1762625598"},{"product_id":"estructura-aluminio-coplanar-chapa-10-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 10 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels with Microrail\u003c\/strong\u003e is designed for long rows of ten modules on metal roofs. The “rail-less” system eliminates the continuous rail and uses microrails fixed directly to the crest of the corrugation with HEX AN16 self-drilling screws and EPDM washer, which drastically reduces the number of components, weight, and installation time. The coplanar mounting improves aesthetic integration and maintains robust and watertight fastening even in demanding environments.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: less logistics, fewer cuts and drillings.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation with discreet coplanar finish.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and easy access for inspection.\u003c\/li\u003e\n  \u003cli\u003eSimple modulation of large roof areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with large sheet metal or sandwich panel surfaces that require high productivity, structural safety, and minimal intrusion on the roof.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eReference supports\u003c\/td\u003e\n\u003ctd\u003e40 microrails (min.); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 18 mid clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Apply EPDM to all fixings and verify equipotential bonding. It is recommended to section into 5+5 to optimize loads, logistics, and maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 10 Panels with Microrail\u003c\/strong\u003e offers a clean, watertight, and highly reliable assembly for large-format photovoltaic installations on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758494549,"sku":"ELEKEST018","price":104.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_c8dcb817-a989-4258-8ac8-2f3eeb2392b6.png?v=1762625601"},{"product_id":"estructura-aluminio-coplanar-chapa-2-paneles","title":"Coplanar Aluminum Structure Sheet 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 2 Panels\u003c\/strong\u003e allows the installation of a row of two modules flush with the metal roof, securing the angles on the ridge with HEX AN16 self-drilling screws and EPDM washer. The 47×37 mm aluminum rail and universal clamps ensure rigidity, even load distribution, and a clean, durable finish.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with HEX AN16 screws + EPDM.\u003c\/li\u003e\n  \u003cli\u003eRails with connector if the standard section is exceeded for structural continuity.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal roof penetration.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with fewer joints and cable routing through the rail.\u003c\/li\u003e\n  \u003cli\u003eWatertightness ensured at every fixing point.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long outdoor service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for sheet metal roofs in industrial, agricultural, and commercial buildings where a robust, watertight, and quick-to-install system is prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003eUniversal 30\/35 mm (4 end + 2 intermediate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eProject conditions\u003c\/td\u003e\n\u003ctd\u003eWind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, grounding clips\/kit, cable glands, and EPDM tape for watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 2 Panels\u003c\/strong\u003e offers professional, safe, and durable installation on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758527317,"sku":"ELEKEST002","price":68.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_4121890d-b385-41c3-b627-8aeb5bf21359.png?v=1762625605"},{"product_id":"estructura-aluminio-coplanar-chapa-2-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 2 Panels with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 2 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of two photovoltaic modules on a metal roof with the minimum number of components. The microrail is fixed directly to the crest of the corrugation using HEX AN16 self-drilling screws with EPDM washer, avoiding the use of continuous rails and reducing perforations, weight, and installation time. Universal clamps for 30–35 mm frames ensure fastening and mechanical continuity between modules.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer profiles and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that minimizes the visual impact on the building.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail-based solutions.\u003c\/li\u003e\n  \u003cli\u003eGuaranteed watertightness at every fastening point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and safe installation with standard tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panel roofs where a fast-to-install, watertight, and highly durable system is needed, maintaining site productivity and roof safety.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per module\u003c\/td\u003e\n\u003ctd\u003e4 (min.); indicative total: 8 supports for 2 modules\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 2 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd\/intermediate clamps 30\/35 mm, grounding clips per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and check the equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 2 Panels with Microrail\u003c\/strong\u003e provides speed, safety, and aesthetics on metal roofs, ensuring a professional, watertight, and long-lasting installation.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758592853,"sku":"ELEKEST034","price":40.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_96614367-f1e1-4298-9927-c772895890fd.png?v=1762625609"},{"product_id":"estructura-aluminio-coplanar-chapa-3-paneles","title":"Coplanar Aluminum Structure Sheet 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 3 Panels\u003c\/strong\u003e forms a coplanar row of three modules on a metal roof (corrugated\/trapezoidal sheet or sandwich panel). It is anchored at the crest using HEX AN16 self-drilling screws with EPDM washer and uses a 47×37 mm aluminum rail, achieving a secure, watertight, and visually integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16\u003c\/strong\u003e bimetallic screws and EPDM.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible roof slope: ≤30°; cable routing in the rail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules are flush with the sheet.\u003c\/li\u003e\n  \u003cli\u003eQuick and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and long outdoor service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with metal roofs that require a coplanar, watertight, and highly durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet with crest angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 4 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, clips\/grounding kit, cable glands, and EPDM tape. Maintain expansion joints at connectors and always fix at the crest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 3 Panels\u003c\/strong\u003e offers a clean, secure, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758658389,"sku":"ELEKEST003","price":101.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_fa93084c-35de-4176-949a-778e182d47a9.png?v=1762625614"},{"product_id":"estructura-aluminio-coplanar-chapa-3-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 3 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet, 3 Panels with Microrail\u003c\/strong\u003e arranges a coplanar row of three modules on corrugated metal roofs or sandwich panels. The “rail-less” system replaces the rail with microrails fixed directly on the crest using HEX AN16 self-drilling screws and EPDM washer, reducing weight, perforations, and installation time without sacrificing rigidity or watertightness.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar system with microrail: fewer parts, simple logistics, and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and intermediate clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel fasteners.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules remain coplanar with the sheet.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixation thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and easy access for inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with metal roofs where fast installation, watertightness, and durability are required with a row of three modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e12 supports (min.) indicative; 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 4 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Place EPDM on all fixations and verify the equipotentiality of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Sheet, 3 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency in installation time.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758756693,"sku":"ELEKEST011","price":48.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_281cff8a-dee2-4bbd-b64a-808b7a5ae5f2.png?v=1762625620"},{"product_id":"estructura-aluminio-coplanar-chapa-4-paneles","title":"Coplanar Aluminum Structure Sheet 4 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAluminum Coplanar Structure for Metal Roof, 4 Panels\u003c\/strong\u003e allows the installation of a coplanar row of four modules flush with the metal roof, securing the brackets on the ridge with HEX AN16 screws and EPDM washer. The 47×37 mm aluminum rail and universal clamps ensure structural continuity, cable routing, and a quick, robust, and watertight installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on the ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not fix on the valley.\u003c\/li\u003e\n  \u003cli\u003eRails with 2–3 connectors for continuity and controlled expansion.\u003c\/li\u003e\n  \u003cli\u003eAluminum profiles EN AW-6082; stainless steel fasteners A2\/A4.\u003c\/li\u003e\n  \u003cli\u003ePermissible slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration without raising the modules.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eWatertightness and durability in industrial and agricultural environments.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: annual inspection and retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and metal roofs where a reliable, watertight, and long-lasting solution is required for longer spans.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on metal sheet with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 6 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, clips\/grounding kit, cable glands, and EPDM tape. Increase bracket density at edges\/parapet and maintain expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Coplanar Structure for Metal Roof, 4 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation, improving the efficiency and lifespan of your photovoltaic system on a metal roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502758822229,"sku":"ELEKEST004","price":116.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_14a07598-bece-4ca1-b1b9-aa9550353149.png?v=1762625623"},{"product_id":"estructura-aluminio-coplanar-chapa-4-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 4 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 4 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of four modules on a metal roof without continuous rails. The microrails are screwed onto the crest of the corrugation with HEX AN16 screws and EPDM washer, providing secure and sealed fastening while the universal clamps hold the 30–35 mm frame. Lightweight, quick, and highly durable solution.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e“Rail-less” system with microrail: less weight and fewer perforations.\u003c\/li\u003e\n  \u003cli\u003eDirect fastening on the crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frame modules; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eMaterials: EN AW-6082 aluminum and A2\/A4 stainless steel, anti-corrosion.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and lower visual impact.\u003c\/li\u003e\n  \u003cli\u003eAgile assembly with even distribution of loads and easy access to wiring.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at all fixings using EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and sandwich panel roofs where a watertight, lightweight, and modular solution is required for rows of four modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e16 supports (min.) indicative; 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 6 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Use EPDM under each fixing and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 4 Panels with Microrail\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the reliability and aesthetics of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759051605,"sku":"ELEKEST012","price":56.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_f255d065-393b-450e-a3a0-17a3cede2a91.png?v=1762625627"},{"product_id":"estructura-aluminio-coplanar-chapa-5-paneles","title":"Coplanar Aluminum Structure Sheet 5 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 5 Panels\u003c\/strong\u003e allows the installation of a coplanar row of five photovoltaic modules on metal roofs (corrugated\/trapezoidal sheet or sandwich panel). The system is fixed on the crest of the corrugation using HEX AN16 self-drilling screws with EPDM sealing washer and uses 47×37 mm aluminum rails to provide rigidity, cable routing, and structural continuity. The result is a robust, watertight, and visually integrated installation, with the modules flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 5 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on the crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never in the valley.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eProfiles in EN AW-6082 aluminum; A2\/A4 stainless steel anti-corrosion fasteners.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; cable routing through the rail channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration by keeping the modules coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with even load distribution over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life in industrial and agricultural environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panel roofs where a coplanar, watertight, robust, and quick-to-install system is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 self-drilling screws with EPDM washer (on crest)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Distribute the angles every 1.0–1.5 m and increase density at edges\/attic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 5 Panels\u003c\/strong\u003e ensures a professional, safe, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759149909,"sku":"ELEKEST005","price":144.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_e490c051-4bb5-4ba0-9a9d-91aa06f01a10.png?v=1762625632"},{"product_id":"estructura-aluminio-coplanar-chapa-5-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 5 Panels with Microrail","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for 5 Panels with Microrail\u003c\/strong\u003e allows installation of a row of five modules on a metal roof without continuous rails. The microrails are fixed on the crest with HEX AN16 self-drilling screws and EPDM washer, reducing weight and perforations while maintaining robust, watertight, and visually integrated fastening.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer parts and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation by eliminating the continuous rail.\u003c\/li\u003e\n  \u003cli\u003eAesthetic coplanar integration and minimal roof intrusion.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panels where installation speed, watertightness, and durability are prioritized in rows of five modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e20 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and verify equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 5 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency during installation time.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for 5 Panels with Microrail\u003c\/strong\u003e allows installation of a row of five modules on a metal roof without continuous rails. The microrails are fixed on the crest with HEX AN16 self-drilling screws and EPDM washer, reducing weight and perforations while maintaining robust, watertight, and visually integrated fastening.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"Rail-less\" system with microrail: fewer parts and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eCrest mounting with HEX AN16 + EPDM; do not screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames with end and mid clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and lighter installation by eliminating the continuous rail.\u003c\/li\u003e\n  \u003cli\u003eAesthetic coplanar integration and minimal roof intrusion.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial buildings, warehouses, and sandwich panels where installation speed, watertightness, and durability are prioritized in rows of five modules.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e20 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 8 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Place EPDM on all fixings and verify equipotential bonding of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Sheet Metal 5 Panels with Microrail\u003c\/strong\u003e ensures a professional, watertight, and durable installation with maximum efficiency during installation time.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759641429,"sku":"ELEKEST013","price":64.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_9acfd2ac-a56d-4f22-a5b5-48431eaf4fdc.png?v=1762625636"},{"product_id":"estructura-aluminio-coplanar-chapa-6-paneles","title":"Coplanar Aluminum Structure Sheet 6 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 6 Panels\u003c\/strong\u003e is designed to form a coplanar row of six modules on metal roofs. Fixing is always done on the crest of the corrugation using HEX AN16 self-drilling screws with EPDM, while the 47×37 mm aluminum rails — joined with connectors — provide structural continuity, cable routing, and a fast, watertight installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 6 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixing on crest with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; expansion control at connectors.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform distribution of loads over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and high durability outdoors.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial, agricultural, and commercial buildings with corrugated sheet or sandwich panel roofs that require a watertight, robust, and modular solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 10 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 self-drilling screws with EPDM washer (on crest)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eUniversal 30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edge\/parapet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 6 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing the reliability and service life of your photovoltaic system on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759706965,"sku":"ELEKEST006","price":167.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_1e5b90c8-7f4b-45c6-8a6d-9f5d764c0d07.png?v=1762625639"},{"product_id":"estructura-aluminio-coplanar-chapa-6-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 6 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 6 Panels with Microrail\u003c\/strong\u003e arranges a coplanar row of six modules on metal roofs. The “rail-less” system secures microrails directly to the ridge using HEX AN16 screws with EPDM, reducing weight and perforations while providing secure, watertight, and quick installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: fewer components and reduced installation time.\u003c\/li\u003e\n  \u003cli\u003eRidge mounting with HEX AN16 + EPDM; expansion control per module.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum and A2\/A4 stainless steel anti-corrosion fasteners.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion into the metal sheet.\u003c\/li\u003e\n  \u003cli\u003eEven load distribution and easy access to wiring.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at every fixing point.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial, agricultural buildings and sandwich panel roofs that require speed, watertightness, and durability in six-module rows.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eOn ridge with HEX AN16 screws + EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e24 microrails (min.), 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 10 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit, cable glands, and UV ties. Apply EPDM to all fixings and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 6 Panels with Microrail\u003c\/strong\u003e offers a clean, secure, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759870805,"sku":"ELEKEST014","price":72.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_e7800031-1294-4bb8-87d0-84fc25cbb4a0.png?v=1762625643"},{"product_id":"estructura-aluminio-coplanar-chapa-7-paneles","title":"Coplanar Aluminum Structure Sheet 7 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 7 Panels\u003c\/strong\u003e allows you to configure a coplanar row of seven modules on metal roofs (corrugated\/trapezoidal sheet or sandwich panel). Fixing is always done on the crest using HEX AN16 self-drilling screws with EPDM washer, while the 47×37 mm aluminum rails —joined with connectors— provide structural continuity, cable routing, and a quick, watertight, and visually integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 7 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eCrest fixing with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; do not fix in the valley.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow project resistance according to calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules remain coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFast and safe assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixing point and minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in industrial and agricultural environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for warehouses, storage buildings, and sandwich panel roofs that require a robust, watertight, and quick-to-install system with long spans per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with angle to corrugation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 12 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixing to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute angles every ≤1.5 m and reinforce at edges\/attic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal 7 Panels\u003c\/strong\u003e ensures a professional, safe, and durable installation, optimizing the reliability and aesthetics of your metal roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502759969109,"sku":"ELEKEST007","price":198.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_0cb41163-5ac0-4164-8cef-199c48e52dd2.png?v=1762625648"},{"product_id":"estructura-aluminio-coplanar-chapa-7-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 7 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 7 Panels with Microrail\u003c\/strong\u003e allows the installation of a coplanar row of seven modules on corrugated metal roofs or sandwich panels with the minimum number of components. By dispensing with the continuous rail and using microrails fixed on the crest with HEX AN16 screws and EPDM washer, weight, perforations, and assembly time are reduced, while maintaining watertightness and structural rigidity.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e“Rail-less” system with microrail: less logistics and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with HEX AN16 screws + EPDM; never in the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with 30–35 mm frames using end and intermediate clamps.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: aluminum EN AW-6082 and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eDesign resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the modules are coplanar with the sheet metal.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness at each fixation thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance and easy access to wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026amp;I buildings with corrugated sheet metal or sandwich panel roofs where long rows per string and fast, watertight, and durable installation are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e28 microrails (indicative minimum); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 12 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet metal); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Apply EPDM to all fixations and verify equipotentiality of the row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 7 Panels with Microrail\u003c\/strong\u003e guarantees a professional, safe, and watertight installation, optimizing time and reliability on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760034645,"sku":"ELEKEST015","price":80.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_a668c665-3337-4209-a228-2176bfa744e0.png?v=1762625653"},{"product_id":"estructura-aluminio-coplanar-chapa-8-paneles","title":"Coplanar Aluminum Structure Sheet 8 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 8 Panels\u003c\/strong\u003e is designed for long rows of eight modules on metal roofs. The brackets are fixed to the ridge with HEX AN16 self-drilling screws and EPDM washer, and the 47×37 mm rails provide structural continuity, cable management, and a clean finish flush with the sheet metal.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 8 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation on ridge with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eRails with multiple connectors for expansion control.\u003c\/li\u003e\n  \u003cli\u003eProfiles in EN AW-6082 aluminum; stainless steel A2\/A4 fasteners.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow calculation according to site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration with minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and long outdoor service life.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial and commercial buildings with corrugated sheet metal or sandwich panel roofs where a watertight, robust, and modular solution is required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with bracket to ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 14 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on ridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, rail connectors, clips\/grounding kit, cable glands, and EPDM tape. Distribute brackets every 1.0–1.5 m and reinforce around the perimeter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 8 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing the reliability and aesthetics of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760231253,"sku":"ELEKEST008","price":213.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_13b11303-e3e2-48b1-bc32-0a0134c63117.png?v=1762625656"},{"product_id":"estructura-aluminio-coplanar-chapa-8-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 8 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 8 Panels with Microrail\u003c\/strong\u003e is designed for long rows on metal roofs. The “rail-less” system secures microrails directly to the ridge with HEX AN16 self-drilling screws and EPDM washer, avoiding continuous rails and improving on-site productivity without compromising structural safety or watertightness.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail without rail: fewer profiles, lower weight, and simplified logistics.\u003c\/li\u003e\n  \u003cli\u003eRidge mounting with HEX AN16 + EPDM; expansion control per module.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames (end and intermediate clamps).\u003c\/li\u003e\n  \u003cli\u003eLong-life materials: EN AW-6082 aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eTypical project: wind ≤150 km\/h and snow ≤40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eFast and safe installation with even distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eRobust watertightness at each fixing point thanks to EPDM.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for industrial buildings, warehouses, and sandwich panel roofs seeking a watertight, lightweight, and modular solution with eight modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSupports per row\u003c\/td\u003e\n\u003ctd\u003e32 microrails (minimum indicative); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 14 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV-resistant ties. Use EPDM on all fixings and check equipotential continuity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Metal Roof, 8 Panels with Microrail\u003c\/strong\u003e offers a clean, fast, and durable installation, maximizing the reliability and aesthetics of your photovoltaic system on a metal roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760264021,"sku":"ELEKEST016","price":87.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_6065cc73-e67c-4eba-88f5-bb6c6e0b4765.png?v=1762625660"},{"product_id":"estructura-aluminio-coplanar-chapa-9-paneles","title":"Coplanar Aluminum Structure Sheet 9 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 9 Panels\u003c\/strong\u003e allows the installation of a coplanar row of nine modules on a metal roof, with crest fixation using HEX AN16 screws and EPDM washer. The 47×37 mm rails are joined with connectors to provide structural continuity, expansion control, and cable routing, achieving a robust, watertight, and discreetly integrated installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 9 modules with 30–35 mm frame.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never in the valley.\u003c\/li\u003e\n  \u003cli\u003e47×37 mm rail with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum and A2\/A4 stainless steel for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eAdmissible slope: ≤30°; wind\/snow load calculation according to zone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration and minimal intrusion on the roof.\u003c\/li\u003e\n  \u003cli\u003eQuick assembly with uniform distribution of forces over long sections.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness and reduced maintenance.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for warehouses and sandwich panel roofs that require a watertight, robust, and quick-to-install solution with a large number of modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar on sheet metal with trapezoidal angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps\u003c\/td\u003e\n\u003ctd\u003e4 end + 16 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFixation to sheet metal\u003c\/td\u003e\n\u003ctd\u003eHEX AN16 screws with EPDM on crest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eRail connectors, 30\/35 mm clamps, clips\/grounding kit, cable glands, and EPDM tape. Densify angles at edges and central section to limit deflection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure for Sheet Metal, 9 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation on large metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760362325,"sku":"ELEKEST009","price":235.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-1_480b22b0-4767-4ece-b5e8-d0201e1e2dbb.png?v=1762625665"},{"product_id":"estructura-aluminio-coplanar-chapa-9-paneles-microrail","title":"Coplanar Aluminum Structure Sheet 9 Panels with Microrail","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAluminum Coplanar Structure for Metal Sheet 9 Panels with Microrail\u003c\/strong\u003e configures a coplanar row of nine modules on corrugated metal roofs or sandwich panels with a “rail-less” system that eliminates the continuous rail. Each microrail is fixed on the crest using HEX AN16 self-drilling screws with EPDM washer, reducing weight, perforations, and installation time without compromising watertightness or mechanical strength. The universal clamps for 30–35 mm frames ensure a solid and continuous attachment between modules, while the coplanar design offers a clean and integrated finish.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrorail system \u003cem\u003ewithout rail\u003c\/em\u003e: fewer parts, simplified logistics, and faster installation.\u003c\/li\u003e\n  \u003cli\u003eCrest fixation with \u003cstrong\u003eHEX AN16 + EPDM\u003c\/strong\u003e; never screw into the valley.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 30–35 mm frames; landscape orientation preferred.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: aluminum EN AW-6082 and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eProject resistance: wind up to 150 km\/h and snow up to 40 kg\/m² (according to calculation).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration: the modules remain coplanar with the metal sheet.\u003c\/li\u003e\n  \u003cli\u003eFewer penetrations and lower total weight compared to rail-based solutions.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM on all fixings.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance and easy access to wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for industrial, agricultural, and C\u0026I buildings with large metal sheet or sandwich panel surfaces where installation speed, watertightness, and durability are priorities.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar “rail-less” with microrail\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; landscape recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eIndicative supports\u003c\/td\u003e\n\u003ctd\u003e36 microrails (min.); 2 screws per support\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eClamps per row\u003c\/td\u003e\n\u003ctd\u003e4 end + 16 intermediate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (HEX to sheet); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003e30\/35 mm clamps, clips\/grounding kit per module, cable glands, and UV ties. Place EPDM on each fixing and verify the equipotentiality of the row. For long surfaces, consider dividing into 5+4 or 3+3+3 to optimize assembly and load distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Coplanar Structure for Metal Sheet 9 Panels with Microrail\u003c\/strong\u003e guarantees a professional, watertight, and durable installation, maximizing productivity and reliability on metal roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760460629,"sku":"ELEKEST017","price":95.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-CHAPA-SENCILLA-1_08dbd26f-9470-4fd5-904f-0b19f978ad33.png?v=1762625669"},{"product_id":"estructura-aluminio-coplanar-salvatejas-1-panel","title":"Coplanar Aluminum Structure Salvatejas 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 1 Panel\u003c\/strong\u003e is a flush-mounting system that uses a salvateja hook screwed to the beam to secure a photovoltaic module on curved, mixed, or flat tiles. Manufactured from aluminum and stainless steel fasteners, it offers secure installation, EPDM sealing, and aesthetic integration without raising the panel.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hook screwed to the beam (never to the tile) with stainless steel screws A2 8×100\/120.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eProfiles made of aluminum EN AW-6082 and stainless steel fasteners A2\/A4 for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and secure installation, with EPDM sealing and discreet visual integration.\u003c\/li\u003e\n  \u003cli\u003eReliable load distribution and resistance to wind and snow as dimensioned.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile roofs on beams or battens in residential and commercial buildings requiring a coplanar, robust, and architecturally integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fastening\u003c\/td\u003e\n\u003ctd\u003eSalvateja hook to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel fasteners A2\/A4; EPDM washer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eThis product is compatible with end\/intermediate clamps 30\/35 mm, rail connectors, grounding clips, cable glands, and UV ties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 1 Panel\u003c\/strong\u003e is a professional solution for tile roofs that maximizes safety, durability, and aesthetic integration.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760657237,"sku":"ELEKEST019","price":85.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1.png?v=1762625673"},{"product_id":"estructura-aluminio-coplanar-salvatejas-2-paneles","title":"Coplanar Aluminum Structure Salvatejas 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 2 Panels\u003c\/strong\u003e allows mounting a row of two modules on a tiled roof using salvateja hooks screwed to the beam. The system, made of aluminum with stainless steel screws, ensures robust fastening, equipotential continuity, and EPDM sealing, keeping the panels flush with the roof for discreet integration.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hooks fixed to the beam with stainless steel A2 8×100\/120 screws.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and rail connector if required.\u003c\/li\u003e\n  \u003cli\u003eProfiles made of aluminum EN AW-6082 and stainless steel A2\/A4 screws.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and safe installation with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eNeat appearance as the modules are coplanar with the tiles.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to corrosion and weathering; minimal maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for pitched roofs with curved\/mixed\/flat tiles in residential and commercial buildings seeking structural reliability and architectural integration.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fastening\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum EN AW-6082; stainless steel screws A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and UV ties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 2 Panels\u003c\/strong\u003e offers a clean, safe, and durable installation, enhancing the aesthetics and reliability of the roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502760853845,"sku":"ELEKEST020","price":97.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_a7abe9d5-dfb4-4360-b1ac-ac379a885bcc.png?v=1762625675"},{"product_id":"estructura-aluminio-coplanar-salvatejas-3-paneles","title":"Coplanar Aluminum Structure Salvatejas 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 3 Panels\u003c\/strong\u003e allows the installation of a coplanar row of three photovoltaic modules on curved, mixed, or flat tile roofs, fixing each point to the beam using salvateja hooks. The system, manufactured from EN AW-6082 aluminum with A2\/A4 stainless steel screws, keeps the panels flush with the roof for impeccable aesthetic integration and ensures watertightness at each anchor point using EPDM washers.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eSalvateja hook screwed to beam with A2 stainless steel screws 8×100\/120 (never to the tile).\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail \u003cstrong\u003e47×37 mm\u003c\/strong\u003e with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and A2\/A4 stainless steel; watertightness with EPDM.\u003c\/li\u003e\n  \u003cli\u003ePermissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet visual integration as the modules are coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eQuick and secure installation with even distribution of loads between hooks.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to wind and snow as dimensioned; low maintenance requirements.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity via rail and ground clip per module for electrical safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched tile roofs on beams or battens in residential and commercial buildings seeking a durable, watertight, and architecturally integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fixing\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eEN AW-6082 aluminum; A2\/A4 stainless steel screws; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, ground clips\/kit, cable glands, and UV ties. Leave gaps in connectors for expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 3 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the aesthetics and reliability of your photovoltaic installation on tile roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761181525,"sku":"ELEKEST021","price":144.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_266db219-ae68-496e-b8ad-97efc163f89b.png?v=1762625678"},{"product_id":"estructura-aluminio-coplanar-salvatejas-4-paneles","title":"Coplanar Aluminum Structure Salvatejas 4 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 4 Panels\u003c\/strong\u003e is designed to fix a coplanar row of four modules on curved, mixed, or flat tile roofs. Each salvateja hook is screwed directly to the beam (never to the tile) with stainless steel screws, and the coplanar rail 47×37 mm provides structural continuity and cable routing. The result is a robust installation, watertight thanks to EPDM, and visually integrated as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eFixing with salvateja hooks and \u003cstrong\u003estainless steel screws 8×100\/120\u003c\/strong\u003e to the beam.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; 2–3 connectors distributed according to span.\u003c\/li\u003e\n  \u003cli\u003eEN AW-6082 aluminum profiles; A2\/A4 stainless steel screws; EPDM washers.\u003c\/li\u003e\n  \u003cli\u003eAdmissible roof slope: up to 30°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration without protruding from the plane of the tile.\u003c\/li\u003e\n  \u003cli\u003eHomogeneous load distribution and greater rigidity over long spans.\u003c\/li\u003e\n  \u003cli\u003eHigh durability and minimal maintenance due to anti-corrosion materials.\u003c\/li\u003e\n  \u003cli\u003eElectrical safety with rail equipotentiality and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eRecommended for homes and businesses with tile roofs that require a reliable, discreet, and long-lasting solution, with wind and snow resistance dimensioned.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType of fixing\u003c\/td\u003e\n\u003ctd\u003eSalvateja hooks to beam + coplanar rail 47×37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eEN AW-6082 aluminum; A2\/A4 stainless steel screws; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torques\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (M8 on rail); 9–10 Nm (clamps); 20–25 Nm (8×100\/120 to beam)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, cable glands, and UV ties. Reinforce the number of hooks in edge\/attic areas and maintain expansion joints in connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Salvatejas 4 Panels\u003c\/strong\u003e ensures a professional, reliable, and aesthetic installation, improving the safety and durability of your tile roof.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761279829,"sku":"ELEKEST022","price":175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SALVATEJAS-1_54324cf2-ca29-4558-a5a8-efc7a8a8abc5.png?v=1762625679"},{"product_id":"estructura-aluminio-coplanar-tornillo-1-panel","title":"Coplanar Aluminum Structure Screw 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 1 Panel\u003c\/strong\u003e is a flush mounting system for a photovoltaic module, designed for pitched roofs with tile, wood, or concrete. It combines anodized aluminum profiles and stainless steel fasteners with a D:10 self-drilling screw and adapter angle, achieving a secure, watertight, and durable installation without raising the panel above the roof surface.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: modules with 30–35 mm frame (portrait or landscape).\u003c\/li\u003e\n  \u003cli\u003eCoplanar fastening with D:10 self-drilling screw and EPDM washer for watertightness.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail type 47×37 mm with channel for M8 hammer screw.\u003c\/li\u003e\n  \u003cli\u003eStructural aluminum profiles and stainless steel fasteners A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eQuick, clean installation with equipotential continuity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration as the module remains flush with the roof.\u003c\/li\u003e\n  \u003cli\u003eDirect and robust fastening, suitable for wind and snow loads.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance thanks to anti-corrosion materials.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing with EPDM at each anchoring point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eEspecially suitable for pitched roofs with curved\/mixed\/flat tile, fiber cement on battens, wood, or concrete. Suitable for homes and businesses where a discreet, secure, and architecturally integrated installation is prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel fasteners A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kits, UV cable glands, and anti-slip stops. Use EPDM washer at each D:10 point for watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 1 Panel\u003c\/strong\u003e is the professional solution for fixing your module in a discreet, secure, and durable way, optimizing roof space and aesthetics.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761312597,"sku":"ELEKEST023","price":66.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1.png?v=1762625682"},{"product_id":"estructura-aluminio-coplanar-tornillo-10-paneles","title":"Coplanar Aluminum Structure Screw 10 Panels","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 10 Panels\u003c\/strong\u003e is designed to form a coplanar row of ten modules fixed directly to the roof using a self-drilling screw D:10 and adapter angle. The system uses anodized aluminum profiles with stainless steel A2\/A4 screws and EPDM washers at each anchor point, achieving a robust, watertight, and visually integrated installation as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fastening: self-drilling screw D:10 + adapter angle and EPDM per point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail with grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eAgile and secure assembly with uniform distribution of loads over long spans.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to wind and snow loads; minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eReliable watertightness thanks to EPDM at all anchoring points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for pitched roofs with curved\/mixed\/flat tiles, fiber cement on battens, wood, or concrete in residential and commercial installations requiring a discreet, safe, and durable solution with a large number of modules per row.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and mid clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. For long sections, distribute D:10 anchors at edges and central areas, and leave expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure with Screw for 10 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing the reliability and aesthetics of large-format photovoltaic systems on pitched roofs.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761541973,"sku":"ELEKEST032","price":295.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_36bfeff8-0a6a-448b-9740-2db54f82e8ae.png?v=1762625684"},{"product_id":"estructura-aluminio-coplanar-tornillo-2-paneles","title":"Coplanar Aluminum Structure Screw 2 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 2 Panels\u003c\/strong\u003e allows the installation of a coplanar row of two photovoltaic modules on pitched roofs with direct fastening using a D:10 self-drilling screw and adapter angle. The system, made of anodized aluminum with stainless steel screws, offers quick assembly, watertightness with EPDM, and an aesthetic flush integration with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 2 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fastening with D:10 self-drilling screw + EPDM washer for sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw and connectors.\u003c\/li\u003e\n  \u003cli\u003eMaterials: structural anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity through rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAgile and robust installation with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eDiscreet finish as the modules are coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to corrosion and weather agents; minimal maintenance.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at each point thanks to EPDM and adapter angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for curved\/mixed\/flat tile roofs, fiber cement on battens, wood or concrete, in homes and businesses where integrated aesthetics, safety, and durability are prioritized.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 2 Panels\u003c\/strong\u003e is the professional solution for discreet, safe, and durable installation on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761607509,"sku":"ELEKEST024","price":74.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_2e2a2403-6188-4c3a-bdbd-d6acb3d1e91d.png?v=1762625688"},{"product_id":"estructura-aluminio-coplanar-tornillo-3-paneles","title":"Coplanar Aluminum Structure Screw 3 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 3 Panels\u003c\/strong\u003e forms a coplanar row of three photovoltaic modules fixed directly to the roof with a D:10 self-drilling screw and adapter angle. The assembly uses anodized aluminum profiles and stainless steel fasteners, ensuring watertightness with EPDM, high rigidity, and a clean visual integration without raising the panels.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fixing with adapter angle and EPDM washer for sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and inox A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAesthetic integration into the roof, reducing visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly, with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eLong service life and low maintenance in demanding environments.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at all anchoring points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile, fiber cement on batten, wood, or concrete roofs in residential and commercial installations that require a discreet, robust, and durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; inox A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 3 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing safety, aesthetics, and durability on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761705813,"sku":"ELEKEST025","price":113.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_047f776c-f8ce-4858-a6d5-ae9b312355f2.png?v=1762625690"},{"product_id":"estructura-aluminio-coplanar-tornillo-4-paneles","title":"Coplanar Aluminum Structure Screw 4 Panels","description":"\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 4 Panels\u003c\/strong\u003e forms a coplanar row of four modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. Manufactured from anodized aluminum with stainless steel fasteners, it ensures watertightness with EPDM washer, high mechanical strength, and aesthetic integration as the panels are flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 4 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect D:10 fastening with adapter angle and EPDM sealing at each point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnodized structural aluminum profiles; stainless steel A2\/A4 fasteners.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity per rail and ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet visual integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eQuick and robust assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eLong service life due to anti-corrosion materials and reliable sealing.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for pitched roofs with curved\/mixed\/flat tiles, fiber cement on battens, wood, or concrete in residential and commercial installations prioritizing aesthetics, safety, and architectural integration.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with self-drilling screw D:10 + adapter bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePermissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Use EPDM washer at each D:10 point to ensure watertightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure with Screw for 4 Panels\u003c\/strong\u003e ensures a clean, safe, and durable installation, optimizing roof space and aesthetics.\u003c\/p\u003e\n","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761804117,"sku":"ELEKEST026","price":132.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_411e0821-c921-4803-9efa-5acec7bea611.png?v=1762625693"},{"product_id":"estructura-aluminio-coplanar-tornillo-5-paneles","title":"Coplanar Aluminum Structure Screw 5 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 5 Panels\u003c\/strong\u003e allows the installation of a coplanar row of five photovoltaic modules with direct fastening to the support using a D:10 self-drilling screw and adapter angle. The system combines anodized aluminum profiles and stainless steel screws to provide high resistance, watertightness with EPDM, and a discreet finish as the panels are integrated into the plane of the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 5 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fastening with adapter angle and EPDM washer at each anchor point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; multiple connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential bonding per rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick and robust installation with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eHigh durability against weather, wind, and rated snow loads.\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance thanks to EPDM seals and quality fastenings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of tile, fiber cement on batten, wood, or concrete in residential and commercial buildings seeking a discreet, safe, and integrated solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 5 Panels\u003c\/strong\u003e offers a professional and durable installation, optimizing the aesthetics and reliability of your pitched roof installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761869653,"sku":"ELEKEST027","price":159.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_b49b732b-4bc0-401f-954c-289af0bcd8c2.png?v=1762625696"},{"product_id":"estructura-aluminio-coplanar-tornillo-6-paneles","title":"Coplanar Aluminum Structure Screw 6 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 6 Panels\u003c\/strong\u003e creates a coplanar row of six modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. With anodized aluminum profiles and stainless steel screws, it ensures watertightness with EPDM, high mechanical resistance, and an aesthetic integration as the panels remain flush with the roof.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 6 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixation D:10 with adapter angle and EPDM sealing at each point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel and distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials: anodized aluminum and stainless steel A2\/A4.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity through rail and grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFast and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eDiscreet visual integration as it remains coplanar with the roof.\u003c\/li\u003e\n  \u003cli\u003eLong service life and reduced maintenance thanks to EPDM and stainless steel.\u003c\/li\u003e\n  \u003cli\u003eReliable performance in wind and snow-rated climates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of tile, fiber cement on batten, wood, or concrete in residential and commercial buildings seeking a discreet, safe, and durable solution.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; stainless steel A2\/A4; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Use EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 6 Panels\u003c\/strong\u003e offers a professional, reliable, and aesthetic installation for pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502761967957,"sku":"ELEKEST028","price":190.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_4550ce72-43b3-4164-bf46-4490fd165110.png?v=1762625698"},{"product_id":"estructura-aluminio-coplanar-tornillo-7-paneles","title":"Coplanar Aluminum Structure Screw 7 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 7 Panels\u003c\/strong\u003e allows the installation of a coplanar row of seven modules with direct fastening to the support using a D:10 self-drilling screw and adapter angle. The assembly, made of anodized aluminum with stainless steel screws, ensures watertightness with EPDM, high structural rigidity, and a clean visual integration without raising the panels.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 7 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eD:10 fastening with adapter angle and EPDM washer for durable sealing.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eMaterials: anodized aluminum and A2\/A4 stainless steel; high corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail with ground clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules remain coplanar.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with uniform distribution of loads.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance and long service life in demanding environments.\u003c\/li\u003e\n  \u003cli\u003eReliable sealing at each anchor point thanks to EPDM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for tile, fiber cement on batten, wood, or concrete roofs in residential and commercial installations that prioritize aesthetics, safety, and durability.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 self-drilling screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with channel for M8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, ground clips\/kit, UV cable glands, and anti-slip stops. Apply EPDM at each D:10 point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 7 Panels\u003c\/strong\u003e ensures a clean and professional assembly, optimizing the reliability and aesthetics of your photovoltaic installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762000725,"sku":"ELEKEST029","price":209.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_450618af-42f7-4c0b-9c17-de7f98beaa57.png?v=1762625699"},{"product_id":"estructura-aluminio-coplanar-tornillo-8-paneles","title":"Coplanar Aluminum Structure Screw 8 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 8 Panels\u003c\/strong\u003e allows the installation of a coplanar row of eight photovoltaic modules fixed directly to the roof with a D:10 self-drilling screw and adapter angle. Its design prioritizes aesthetic integration—the panels are flush with the roof—without sacrificing structural safety. Manufactured with anodized aluminum profiles and A2\/A4 stainless steel screws, it ensures corrosion resistance, quick assembly, and watertightness through EPDM washers at each anchoring point.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 8 modules with 30–35 mm frame (landscape recommended; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect fixing: D:10 self-drilling screw + adapter angle and EPDM washer.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with channel for M8 hammer screw; distributed connectors.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion materials: anodized aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eContinuous equipotentiality per rail; grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscreet architectural integration as the modules are coplanar.\u003c\/li\u003e\n  \u003cli\u003eFast and secure assembly with uniform load distribution.\u003c\/li\u003e\n  \u003cli\u003eHigh rigidity against wind and snow loads.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance thanks to EPDM and stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eSuitable for pitched roofs of curved\/mixed\/flat tile, fiber cement on batten, wood, or concrete in residential and commercial buildings that prioritize aesthetics, safety, and system durability.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, grounding clips\/kit, UV cable glands, and anti-slip stops. Apply EPDM at each D:10 point and leave joints in connectors for expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 8 Panels\u003c\/strong\u003e guarantees a professional, reliable, and aesthetic installation, optimizing the safety and service life of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762164565,"sku":"ELEKEST030","price":235.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_ec4f2a3a-f69b-4b13-90cd-276153c37ebc.png?v=1762625701"},{"product_id":"estructura-aluminio-coplanar-tornillo-9-paneles","title":"Coplanar Aluminum Structure Screw 9 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoplanar Aluminum Structure Screw 9 Panels\u003c\/strong\u003e is designed to form a coplanar row of nine modules fixed directly to the roof using a D:10 self-drilling screw and adapter angle. The assembly combines anodized aluminum profiles with A2\/A4 stainless steel screws, offering watertightness with EPDM, high stability against wind\/snow loads, and a clean visual integration as the panels remain flush with the roof surface.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 9 modules with 30–35 mm frame (landscape preferred; portrait compatible).\u003c\/li\u003e\n  \u003cli\u003eDirect D:10 fixing with adapter angle and EPDM washer at each anchor point.\u003c\/li\u003e\n  \u003cli\u003eCoplanar rail 47×37 mm with M8 channel; distributed connectors for continuity.\u003c\/li\u003e\n  \u003cli\u003eMaterials: high-durability anodized aluminum and A2\/A4 stainless steel.\u003c\/li\u003e\n  \u003cli\u003eEquipotential continuity via rail; grounding clip per module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCoplanar aesthetic integration that reduces visual impact.\u003c\/li\u003e\n  \u003cli\u003eFast and robust assembly with even load distribution.\u003c\/li\u003e\n  \u003cli\u003eLong service life in demanding environments thanks to EPDM and stainless steel.\u003c\/li\u003e\n  \u003cli\u003eLow maintenance: inspection of seals and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eIdeal for pitched roofs of tile, fiber cement on battens, wood, or concrete in residential and commercial installations seeking a discreet, safe, and durable system.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoplanar with D:10 screw + adapter angle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003eFrame 30–35 mm; length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRail profile\u003c\/td\u003e\n\u003ctd\u003e47×37 mm with M8 channel and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum; A2\/A4 stainless steel; EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTightening torque\u003c\/td\u003e\n\u003ctd\u003e13–15 Nm (rail); 9–10 Nm (clamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eAdmissible slope\u003c\/td\u003e\n\u003ctd\u003eUp to 30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eEnd and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, and anti-slip stops. Distribute D:10 anchors on edges and central sections; leave expansion joints at connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoplanar Aluminum Structure Screw 9 Panels\u003c\/strong\u003e offers a clean and professional installation, maximizing reliability, aesthetics, and durability on pitched roofs.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762426709,"sku":"ELEKEST031","price":272.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-TORNILLO-1_cef4f647-d960-4c22-be43-358630b80cf1.png?v=1762625704"},{"product_id":"estructura-aluminio-suelo-plano-1-panel-30grados","title":"Aluminum Structure Flat Ground 1 Panel","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure 1 Panel\u003c\/strong\u003e is a professional support system for mounting a photovoltaic module on flat roofs and surfaces, made of anodized aluminum with stainless steel fasteners. Its design prioritizes quick assembly, corrosion resistance, and structural safety, offering a \u003cstrong\u003efixed tilt of 15º\/20º\/30º\u003c\/strong\u003e that optimizes the solar incidence angle and improves annual production without complicating installation.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal compatibility with 30–35 mm frame modules (portrait or landscape orientation).\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum profiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º to adapt performance to site latitude and shading.\u003c\/li\u003e\n\u003cli\u003eAnchoring to the support using M10 bolts (chemical or expansion) with robust fixing plates.\u003c\/li\u003e\n\u003cli\u003eStainless steel A2\/A4 fasteners and equipotential bonding points for safe grounding.\u003c\/li\u003e\n\u003cli\u003eIntegrated cable management in the rail channel for a clean and protected finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and precise assembly thanks to profiles with guides, universal clamps, and optimized connectors.\u003c\/li\u003e\n\u003cli\u003eHigher energy yield by ensuring the optimal working angle throughout the year.\u003c\/li\u003e\n\u003cli\u003eSuperior durability in marine and industrial environments due to aluminum anodizing and use of stainless steel.\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection, torque check, and periodic cleaning.\u003c\/li\u003e\n\u003cli\u003eOrientation flexibility (portrait\/landscape) to adapt to module dimensions and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\n\u003cp\u003eDesigned for installations on walkable flat roofs, technical rooftops, and concrete slabs in residential, commercial, \u003cem\u003eand\u003c\/em\u003e industrial projects. It is ideal for self-consumption, small-scale plants, technical cabins, and modular expansions where reliability, clean aesthetics, and ease of assembly are required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º (depending on leg set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel A2\/A4 fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003ePortrait or landscape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile type with channel for M8 and cable management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003eAnnual retightening and inspection of anchoring points and seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibilities\u003c\/h3\u003e\n\u003cp\u003eCompatible with universal end and mid clamps 30\/35 mm, rail connectors, grounding clips\/kits, UV cable glands, and EPDM protectors under the rail. It is recommended to maintain row spacing according to the \u003cem\u003etilt\u003c\/em\u003e and the height of the module's upper edge to avoid shading. For frames outside 30–35 mm, use specific clamps.\u003c\/p\u003e\n\u003cp\u003eWith the \u003cstrong\u003eFlat Roof Aluminum Structure 1 Panel\u003c\/strong\u003e you will achieve a clean, safe, and durable installation that maximizes available space, improves photovoltaic system efficiency, and facilitates preventive maintenance throughout the entire service life of the installation.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762492245,"sku":"ELEKEST035","price":91.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1.png?v=1762625707"},{"product_id":"estructura-aluminio-suelo-plano-10-paneles-inclinacion","title":"Aluminum Structure Flat Ground 10 Panels","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFlat Roof Aluminum Structure for 10 Panels\u003c\/strong\u003e is designed to mount a continuous row of ten photovoltaic modules on flat surfaces with total safety and efficiency. Its construction in anodized aluminum and stainless steel fasteners offers high resistance to corrosion, quick assembly, and structural stability, while the \u003cstrong\u003e15º\/20º\/30º tilt\u003c\/strong\u003e optimizes the solar angle and reduces shading between rows.\u003c\/p\u003e\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 10 modules with 30–35 mm frame (landscape recommended; portrait supported).\u003c\/li\u003e\n\u003cli\u003eProfiles with 47×37 mm rail type and channel for M8 hammer screw.\u003c\/li\u003e\n\u003cli\u003eAvailable angles: 15º, 20º, or 30º using a set of interchangeable legs.\u003c\/li\u003e\n\u003cli\u003eAnchoring to support with M10 bolts (chemical or expansion) on slab\/flat roof.\u003c\/li\u003e\n\u003cli\u003eStainless steel fasteners A2\/A4; equipotential bonding points for grounding.\u003c\/li\u003e\n\u003cli\u003eDistributed rail connectors for structural continuity and even load distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages or Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast and precise assembly thanks to continuous rails, optimized connectors, and universal clamps.\u003c\/li\u003e\n\u003cli\u003eSuperior performance by ensuring the optimal working angle throughout the year.\u003c\/li\u003e\n\u003cli\u003eHigh rigidity against wind and snow due to continuous profile and dimensioned supports.\u003c\/li\u003e\n\u003cli\u003eHigh durability in marine and industrial environments (anodized aluminum + stainless steel).\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance: visual inspection and annual retightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePurpose or Applications\u003c\/h3\u003e\u003cp\u003eSuitable for residential, commercial, \u003cem\u003eand\u003c\/em\u003e industrial installations on technical rooftops, walkable flat roofs, and concrete slabs. Suitable for self-consumption and modular solar fields that require reliability, standardization, and ease of maintenance.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule compatibility\u003c\/td\u003e\n\u003ctd\u003e30–35 mm frame; typical length 1750–2400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003eFixed 15º \/ 20º \/ 30º\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum profiles; stainless steel fasteners A2\/A4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnchoring to support\u003c\/td\u003e\n\u003ctd\u003eM10 bolts (chemical or expansion) on slab\/flat roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule orientation\u003c\/td\u003e\n\u003ctd\u003eLandscape recommended; portrait compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail\u003c\/td\u003e\n\u003ctd\u003e47×37 mm profile with channel for M8 and cable routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibilities\u003c\/h3\u003e\u003cp\u003eCompatible with end and intermediate clamps 30\/35 mm, rail connectors, clips\/grounding kit, UV cable glands, EPDM protectors under rail, and cable trays\/baskets for long runs. Maintain the separation between rows according to the \u003cem\u003etilt\u003c\/em\u003e and the height of the upper edge of the module to avoid shading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat Roof Aluminum Structure for 10 Panels\u003c\/strong\u003e ensures a clean and professional installation, optimizes the available space, and improves the overall efficiency of your photovoltaic system.\u003c\/p\u003e","brand":"Eleksol","offers":[{"title":"Default Title","offer_id":51502762688853,"sku":"ELEKEST044","price":379.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/0252\/6805\/files\/ELEKSOL-SUELO-1_b566f12d-6052-4b8a-ac8a-4a06e63d184b.png?v=1762625708"}],"url":"https:\/\/aurensol.net\/en\/collections\/eleksol.oembed?page=3","provider":"Aurensol","version":"1.0","type":"link"}